TDMII Flex Cabel what is the length?

[srsoundlab]

We Put together a great computer . we have a hd 2 systhem and we are useing a pc.
the tdm flex cabel to connect the 2 hd cards is just a little too short. Is the TDMII flex cabel replacement a little longer? or is there another fix?
Please help . i just need some information.

Thanks Stephen

[mix109]

No the cable lentgh is fixed.
You should note the way how the (2) sides are connected(PortB->PortA)from card to card.

[John_Toolbox]

Unless the cards are not in contiguous slots(I don't think they'l work right unless right next to each other), the cable should reach fine. There's a little notch in the cards for the ribbon to pass through.

[srsoundlab]

Thanks, in the old computer the slots were next to each other .on this mother board there is one slot that is different between the ones that fit the 2 cards.
we used the same configuration that sweet water has in the workstation they have. sure work ,so the cards seat a little far apart.

thanks stephen

[John_Toolbox]

What model motherboard is this, and are these PCI or PCIe cards? Hopefully someone on here has the same one and will chime in.