ASIO 2.0 + Digidesign TDM Mix plus + Nuendo = ????

[Black-Rose]

Hi there ....
i have protools TDM MixPlus with 3 ( 888 Interface ) and i try to connect them with Nuendo 2.01 By Using ASIO Driver .

After connecting them the ASIO driver work perfectly but when i try to record with monitore ... it has Delay while recording i don`t know why ?
when ask and seek the net it appere that i must have ASIO DRIVER 2.0 to remove the delay by click Direct monitore option on Nundo but it was desible ...so what can i do .....

sorry for wrong spelleing .



P.s : What is the version of ASIO Driver that included in Protools CD
and is the 888 interface compatible with nuendo as stand alone ??

[N-G-NEER]

The 888/24 is not a stand alone convertor. It may be hung off a number of cards or you may use the digital inputs but you must first get the signal from the computer to the 888. Nuendo is a software package which has no outputs as it has no hardware. there may be an inherent delay in the ASIO driver or there may be a delay caused by the cards that don't operate as a native processor for Nuendo

[jellyroll]

The Asio Driver works really well in Nuendo.
I use my HD system with it all the time the only thing is your I/O is limited to 8 channels In and Out
so if you have a big 32 channel I/O configuration 24 channels won't work.

Now the latency you are experiencing is due too you not checking the box that says Direct Monitoring in Nuendo.
This needs to be checked or else your audio is gonna continue passing the signal threw the Nuendo App
,and what you really want to do is bypass the app and monitor directly from the converters.

Hope this helps