|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
No audio coming from Microkorg
Hello avid community, after doing some intensive research online regarding my dilema, I have come to the conclusion that I have gone nowhere in my attempt to fix the audio problem as stated below.
Being a fresh newbie to pro tools, my first goal is to get keyboard sounds from my external instrument to be recognized by pro tools. all I/O settings are on default, I have 2 1/4 cables (trs) going into both the inputs of my audio interface (Apogee IOS), and have created an audio track to try record my synth, but to no avail. The I/O for the Audio track goes as follows... (Input) I/O > Interface > Mic 1-2 (Stereo) (Output) Output > Line 1-2 (Stereo) -> Line 1-2 The track is set to record, but I get no audio or moving bar from within pro tools. I'm desperate to solve the situation as my research has failed immensely for the past year. I really want to start making music using synths, but i'm at a road block. Some help would be really appreciated, Thank you very much Avid community! |
#2
|
|||
|
|||
Re: No audio coming from Microkorg
What happens when you hit Record, and then start playing the synth?
Do you have a selection for Line input? Because that's what the 1/4" cables should be connected to. Does the Microkorg have an internal setting than enables the output jacks? Go to Setup> "I/O..." and check out the input page. Click the Default button. Go back to your audio track and select the input, you should only have two analog inputs available.
__________________
Pro Tools HD 12.4, Pro Tools "Vanilla" 12.4, Artist Transport, 2x Artist Mix Studio Blue: RME UCX, Win7 Pro, i7 960, 16GB || Studio Green: RME Babyface, Win10, i7 7700HQ, 16GB |
#3
|
|||
|
|||
Re: No audio coming from Microkorg
When set to record nothing happens. The audio isn't present at all.
This is how it looks when I set the input in the I/O settings to default. http://postimg.org/image/bq05cozan/ and this is how the track is set up when trying to get audio out of the synth. http://postimg.org/image/6k4gdi815/ http://postimg.org/image/fwu6jidnz/ I'm still unsure what the problem is though. Edit: I just solved the solution. Turns out the Apogee ios had a separate program that enables instrument play (Maestro) , by sacrificing both mic inputs and turning them into instrument inputs. (If that makes any sense) Sorry to take up your time guys. and thank you for the help! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
HELP!NO AUDIO coming out of PT HD 10.2 HELP! | CDac | Pro Tools 10 | 1 | 06-25-2012 10:18 PM |
No Audio coming from Pro Tools | 92PrimeTime | macOS | 2 | 04-12-2012 09:04 AM |
Audio from Venue coming into PT over HDx is about -20 db | kydicarus | VENUE Live Sound Systems | 3 | 05-22-2009 09:06 AM |
Audio not coming through on new PC set-up | ajp | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 1 | 07-14-2006 05:44 PM |
No Audio Coming In From Mic ...help | Tammaru | Digidesign Hardware & Software | 0 | 03-06-2001 09:20 PM |