|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
audio at 002, but not monitors or Command|8
I recently had a flood my home studio and had to move some of my equipment.
Now I have no output from the Command|8. The headphone out on the 002 is working. The headphone out on the Command|8 is not. Nothing from the monitors which are connected to the Command|8. I moved as little as possible, so most of the wiring was left in tact. The Firewire is connected from the 002 to the PC via Soundblaster. Monitors to the Command|8 were never disconnected. Could it be a Soundblaster setting? Any help would be greatly appreciated. |
#2
|
|||
|
|||
Re: audio at 002, but not monitors or Command|8
The command|8 is only a control-surface. So you need to run a cable from the monitor-out from your 002(r) to the command|8 in addition to the midicable or usbcable.
__________________
What's that? - That's the machine that goes "pling". Bastiaan |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
D-Command and D-Control: Controlling Sound Monitors | Intini | ICON & C|24 | 5 | 03-27-2009 11:42 PM |
Connecting Monitors to Command 8 | [email protected] | ProControl, Control|24, Command|8 | 3 | 12-15-2008 08:23 AM |
Loss of audio from the Command|8 and monitors | clampire | ProControl, Control|24, Command|8 | 1 | 02-04-2006 09:11 AM |
no audio to monitors on 001 | JOHN KEITH SR. | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 07-08-2005 09:42 AM |
Audio monitors , | seared music | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 0 | 04-25-2003 02:48 PM |