Digi 001's line level inputs 3-8. Control input?

[dcarlson247]

On page 32 of the "Getting Started with DIGI 001" in the "Analog Audio" section it says that for line level inputs 3-8 on the back of the I/O box, the "Digi 001 includes software controllable gain to accommodate the different line levels that these devices can generate."

Does anybody know where this software control is?

Thank you

[pk_hat]

In your main ProTools folder, there should be one called DigiGain, and an installer for it.

There's also a dialog box in the Hardware Setup menu in PT, and within that, a sub-box titled 'other options'. Click on that and you can then raise or lower the gain inputs.

hope that helps.

pk

[dcarlson247]

Thank you pk_hat. The 'other options' in the hardware set-up was exactly what I was looking for to let me adjust the input gain for 3-8.

I didn't find DigiGain in the main folder but I am aware of and have used the 'gain' plug-in that was already installed with the program. I needed to lower a level coming in from a Roland 1680 so the hardware adjust is going to work perfect.

I appreciate your response a mere 36 minutes after the question was posed.

dcarlson247