Mbox Peak / Peak Light Issue

[soulcatcher]

Hi,

Ok, so I was testing out my new FX box today and I triggerd the Peak Light on my MBox.... however, now the Peak light will not go off and everything coming out of the Mbox is distorted.

Here is what I have done so far...

1) I have unplugged the Mbox for the USB port, reconnected, clicked to the line channel and the Peak lights stay red.

2) I've restarted my entire system, clicked to the line channel on the mbox and still the peak lights stay red.

3) I have removed all audio inputs to insure that I'm not getting a ground issue, restarted and the peak lights stay red.

4) I've removed ALL inputs / outputs so it's just the Mbox connected via the USB (for power), switched to the line channel and and the peak lights are still red.

Finally, I looked in the knowledgebase but couldn't find anything the was anywhere near this issue. Ineed some serious help here, please. To be frank, I'm a little worried.


Thanks.

[Bazzle]

Your going to have to update the firmware.Go to C:\Program Files\Digidesign\Protools\Protools Utilities and click the blue firmware updater icon.If that doesn't work do a Repair installation in
ADD/REMOVE PROGRAMS.