Multiple interfaces to PT9

[towelhead]

I am trying to hook up multiple interfaces to PT9. I've got a FirePod daisy chained into a 003, which is subsequently daisy chained into a LaCie HDD.
Everything I've read so far says that it can't be done. I just want to verify that. Also, I'm pretty new at this, so layman's terms would be much appreciated.

[Craig F]

for clarification:
you want to take the output of the FirePod to the input of the 003? (I don't know the FirePod but I would thin this is posable)
or
both the FirePod and the 003 connected to the computer and active at the same time? (this is not posable)

[towelhead]

Yea, I would want to run both the FirePod and the 003 at the same time. So there is no way to do it, then. Bummer. Thanks for the info though, much appreciated.

[appledude]

The problem is that the Digi 003 will not do aggregate devices. So no you cannot use them together. There may be a device that will aggregate with your firepod. If you had a Digimax D8 instead of the firepod, you could have used the lightpipe into the digi 003.