|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Bounced WAV doesn't translate PT 9
When I bounce my project the wav file is drastically different then what i heard during bounce and what I mixed.
It was recorded off of a LS9 through a Dante card, at 48/16 and I bounced both at 48/16 and 44.1/16 and both don't translate. Thoughts? |
#2
|
||||
|
||||
Re: Bounced WAV doesn't translate PT 9
Is it drastically different or are you listening to it through a different sound card and through iTunes possibly? How is it different?
__________________
-Ryan Young •2019 Mac Pro 3.5 GHz 8-Core Intel Xeon W - 48 GB 2666 MHz DDR4 (OS 10.15.5) •HD Native PCIe, HD Omni, 192 I/o, Pro Tools Ultimate •Avid S3 + Dock •Blackmagic Intensity Pro (HDMI) •5.1 Room with JBL LSR4300 series
|
#3
|
|||
|
|||
Re: Bounced WAV doesn't translate PT 9
I listened to it in protools when I pulled it back in, and in Finder. its mix and pans and fades etc are all different from what I mixed and what I heard during bounce
|
#4
|
|||
|
|||
Re: Bounced WAV doesn't translate PT 9
Are you bouncing stereo interleave and converting after the bounce? Did you put "Dither" across the master buss? Or are you bouncing with the same bit rate? Give us details on exactly how you're bouncing and make sure you DO put a "Dither" plug across the master buss if you ARE changing the bit rate.
__________________
John Pro Tools 12.5 Macbook Pro & Windows 7 Ultimate 64 Bit |
#5
|
|||
|
|||
Re: Bounced WAV doesn't translate PT 9
I put dither on the main out, NO difference, I have tried every combination of bouncing and still nothing, they still bounce with out translating my mixes, very odd....
|
#6
|
||||
|
||||
Re: Bounced WAV doesn't translate PT 9
Is it possible that you are bouncing something other than the 1 & 2 main outs? Maybe that is why you are hearing one thing on the bounce but actually bouncing another signal path?
Did this just start to happen or has it always happened?
__________________
Park The Transfer Lab at Video Park Analog tape to Pro Tools transfers, 1/4"-2" http://www.videopark.com MacPro 6 core 3.33 GHz, OS 10.12.1, 8 GB RAM, PT12.6.1, Focusrite Saffire Pro 40, PreSonus DigiMax, MC Control V3.5, dual displays, Neumann U-47, Tab V76 mic pre, RCA 44BX and 77DX, MacBook Pro 9,1, 2.3 Mhz, i7, CBS Labs Audimax and Volumax. Ampex 440B half-track and four-track, 351 tube full-track mono, MM-1100 16-track. |
#7
|
|||
|
|||
Re: Bounced WAV doesn't translate PT 9
I would bet it's something along these lines. Your bounce source is probably different than your monitoring source.
|
#8
|
|||
|
|||
Re: Bounced WAV doesn't translate PT 9
I checked in all my out put settings... didn't seem to see anything odd.... not sure I would know how to bounce something other then what im hearing....
all my channels are set to output 1-2 and so is my main out.... all my inputs are N/A because my hardware ware isn't hooked up. im trying a "Save Copy as" and seeing if that works..... |
#9
|
|||
|
|||
Re: Bounced WAV doesn't translate PT 9
I also checked back on several other projects I have been working on but hadn't tried to bounce, one of them worked.... one had same problem, my only thought is, the one that worked had not been edited, the one that didn't had.... any correlation?... possibly a plug in issues? the "save as a copy" didn't help...
|
#10
|
|||
|
|||
Re: Bounced WAV doesn't translate PT 9
Quote:
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Unable to translate tracks | IsaacAustin | Windows | 10 | 09-17-2013 03:10 PM |
Volume Trim translate to LE? | KingFish | Pro Tools TDM Systems (Mac) | 1 | 02-03-2009 09:34 AM |
Translate PAL to NTSC | ProTooler | Post - Surround - Video | 10 | 01-18-2007 11:00 AM |
Getting your mixes to translate... | Ssaidvox1 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 8 | 03-18-2003 09:44 PM |
programs to translate a .wav into midi | Bastiaan | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 36 | 08-24-2002 02:04 PM |