Structure- Pitch Wheel assignment?

[RaySoul]

Hey, anybody. Maybe Russ?

Do you know how to assign the pitch wheel in Structure? Actually, trying to get it to bend a lead synth sound. The mod wheel seems to be assigned. The pitch bend indicator is set for 2 up and 2 down. But the wheel won't affect the sound. Any thoughts? Thanx in advance...

[RussUK]

Going to put a video up later. :)

[RaySoul]

Originally Posted by RussUK

Going to put a video up later. :)

Hey Russ.

I can appreciate that. And will definitely check it once you do. But in the meantime, how 'bout a tip?

[RussUK]

Check this pic

You adjust it here to set up the pitch you need.

[RaySoul]

Originally Posted by RussUK

Check this pic

You adjust it here to set up the pitch you need.

Originally Posted by RaySoul

The pitch bend indicator is set for 2 up and 2 down.

Yeah, I already knew that. But, even while it's set, I get no response from my pitch wheel. I thought at first it might be my controller, but pitch works with any other VI I pull up. Any other ideas? Thanx, again.

[RussUK]

What happens if you try and adjust the test tone patch that loads when you start Structure?

[RaySoul]

Originally Posted by RussUK

What happens if you try and adjust the test tone patch that loads when you start Structure?

If you mean adjust the pitch bend value, nothing. I've tried it up and down.
Same as with any patches. This is very strange, because the mod wheel works exactly as it should. Even with the sine wave patch. Just no pitch...

[RaySoul]

See post below...

[RaySoul]

And now for my ULTIMATE revelation. Apparently, my pitch wheel is not working in PT. When I quit PT and open a stand alone VI, it's fine. The same VI when I open PT, mod wheel ok, no pitch. That seems to be the case with any VI I open in PT. Is there some global setting for that I'm not aware of?

[RussUK]

OK, Menu/Setup/MIDI/Input Filter

Then check to see that your bender isn't filtered as off.

First set the filter to allow anything, then filter stuff after that works.