Aviom A360 setup

[holyendy]

System: Mac Pro/MTRX/RedNet, by Dante

My system is controlled by MTR and Aviom D800, connect to multiple Aviom A360 as personal monitor mixers for musicians.

Recently Aviom D800 in Dante is assigned to ch 63/64.

May I ask, how to setup the Aviom A360? assign output in Pro Tools?

Thanks

[creativecontrol]

Greetings,

I'm not sure what this topic has to do with S4 S6 systems? Regarding the D800 - essentially you are going to make Dante subscriptions (patches) via Dante Controller between the MTRX (Dante-64 or Dante-128 expansions) and your AVIOM D800 A-Net distributor. From there, you can either send to the AVIOM either from your crosspoint matrix in DADman (CON) or from within your Monitor Profile environment (ProMon) in DADman > Settings > Monitor Profile.

best,


Jeff

[holyendy]

Thanks Jeff,
Forgot to mention, my whole system is connected to S6, that is why I post this question here.
Thanks for your reply, let me try to figure it out, how to follow your suggestions to set it up.