Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Pro Tools Software > Tips & Tricks

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-27-1999, 08:57 AM
coaster coaster is offline
Member
 
Join Date: Oct 1999
Location: fargo nd usa
Posts: 1,042
Default level calibration

so:
am3 card-mac platform-pt4.3.2
1. created full level (constant 0db) soundfile.
2. set fader at 0
3. ran output to mackie, meters show 0 on mixer (good so far)
4. routed full level sound back into am3
5. same soundfile registering at 0 on mackie now registers at about -9db routed back to pt
6. changed hardware setup to +9 db input gain, now levels are darn close but not the same.

shouldn't i be able to set everything at zero and have it calibrated? this is annoying.

my whole point of doing this was to calibrate a compresser to live full time in between my mixer and the inputs of the am3, not to affect sound quality, but to protect against the unlikely possibility of a flash peak. It has been my experience that if i keep my input levels hot it tends to sound better (fuller- less brittle). i believe this is do to the increased resolution of the higher bit rate achieved by the hot level. (i.e. if you record at -6db you don't get 16 bits- you get less). i'm not looking for a squishy sound.
has anyone done any testing on the calibration of this card?
i would like to have a calibrated system so i can set my master fader on the mackie at 0 and have 0 at the am3.
the return seems calibrated-
my board IS puttin out o, as i have tested it on other gear and it reads 0.
thanx in advance
__________________
www.mp3.com/xtac
for the faint of goth
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
003 Calibration Level drummer9 Pro Tools 9 0 06-30-2011 05:38 AM
CALIBRATION LEVEL Sput 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 3 10-20-2006 07:36 AM
Level calibration DonaldR Tips & Tricks 1 11-02-2004 08:31 AM
listening level calibration? anders Post - Surround - Video 5 10-11-2002 04:09 PM
Digital Calibration Level michael c Tips & Tricks 1 03-10-2001 11:14 PM


All times are GMT -7. The time now is 03:41 PM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com