connect 96 i/o with a creamware A16 via adat

[nachonieto]

hi , i need to connect a 96 i/o via adat to a creamware A 16 ultra , my question is : i need to connect the bnc cable to the worldclock contacs ? , how i rute the conections? in to 96 out to creamware? ..thanks for your help

[tripstation]

Hi,
I used to have a creamware pro 24 ADAT I/O card.
The creamware card should slave via adat.
If you want it to be the slave that is.
You don't need to connect word clock to do this.
connect an adat out from the pro tools interface to an adat in on the creamware interface or card.
connect an adat out on the creamware to an adat in on the pro tools interface.
If you want the creamware to be the slave, select it in the scope software.
If you want the creamware to be the master, select it as master in the scope software, then select slave in protools for the connected inteterface.
This should work in theory.
If you want to use word clock, it should be the same priniciple.
regards,
James

[nachonieto]

thanks a lot