|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#41
|
|||
|
|||
Re: Mbox Pro 3 not working with MacOS Sierra
Quote:
|
#42
|
|||
|
|||
Re: Mbox Pro 3 not working with MacOS Sierra
Quote:
OFC don't expect to get a RADAR looked at soon, but that's a horse of a different color, and those are Apple's internal issues...These are also downright trivial updates that shouldn't really require too much dev work. A lot of it is just removing deprecated APIs...Which if AVID were on top of things in the first place, they wouldn't even be using them to begin with. Other audio interface manufacturers do not have these problems, especially with incremental OS updates. <end rant> I have the USB Mbox, it works for a bit, but it will always stop working, for whatever reason. Reboot fixes it every time. Cable pull / re-insert does not. The blue light flashes on the front of the stupid thing when it goes into this "state" -- I don't have an official AVID support plan...and I'm not paying for one. I dumped ProTools a long time ago, but I still use the MBox. Is there any way I can get in touch with someone from AVID without having to pay for support? Or am I better off throwing this hunk of junk in the garbage and getting something else from a company that will actually stay on top and support their products? |
#43
|
|||
|
|||
Re: Mbox Pro 3 not working with MacOS Sierra
I have the same problem. I have a crash report that shows the kernel panic with all the newest drivers from Avid. I have rolled back to El Capitan which works fine, but I would like to find out if anyone else has successfully fixed their boot problem.
|
#44
|
|||
|
|||
Re: Mbox Pro 3 not working with MacOS Sierra
Does anyone know how I can get my mbox 3 to work with Logic Pro x
Sent from my iPhone using Tapatalk |
#45
|
|||
|
|||
Re: Mbox Pro 3 not working with MacOS Sierra
I'm having the same issue. Plug in the MBox Pro and the computer crashes and reboots with the kernel error message, which basically causes an infinite reboot loop. I can't downgrade because of some other software I use more frequently, so I guess I'm stuck.
I can't believe there isn't a fix for this yet! Btw, I'm using the firewire version. Last edited by dkeeling; 01-24-2017 at 10:47 AM. Reason: Adding info |
#46
|
||||
|
||||
Re: Mbox Pro 3 not working with MacOS Sierra
There's got to be something else going on. I never went through El Cap, but went straight from 10.10.x to 10.12.x and have never had an issue.
Are you able to do a CLEAN OS install? Even to a different drive or partition?
__________________
Eric Seaberg • San Diego, CA A.E.S., I.E.E.E., S.M.P.T.E., S.P.A.R.S. |
#47
|
|||
|
|||
Re: Mbox Pro 3 not working with MacOS Sierra
That's a good idea, although I've gone through all the other iterations of OS X and 10.12 is the first one I've had a problem with. I'll try your idea when I get some time and an extra drive to play around with.
|
#48
|
|||
|
|||
Re: Mbox Pro 3 not working with MacOS Sierra
Is anyone else still struggling with this? MBox pro 3 crashes Macbook Pro immediately when turned on. Firewire and High Sierra, new drivers don't seem to help. Any help appreciated!
|
#49
|
|||
|
|||
Re: Mbox Pro 3 not working with MacOS Sierra
Hey guys,
I'm having a similar problem, and I wanted to get your input if anyone's found a solution. When plugging my MBox Pro (3rd Gen) into my MacBook Pro mid-2014 running macOS Sierra, the computer does a forced reboot and goes into a perpetual reboot loop until I either turn off the MBox or unplug it. I have now paid 300.- to reinstate my support and upgrade to the current ProTools, I've then upgraded to macOS 10.13.2 which is the last supported version and I still cannot use my MBox without a new perpetual reboot loop starting.I am now $300 poorer and still can't use my MBox. What should I do to be able to use my MBox Pro? The MBox works standalone to play music and instruments through my soundsystem without being plugged in to my MacBook Pro and ProTools works standalone as well so there is a problem between the MBox and my MacBook Pro apparently. Before upgrading to High Sierra (I was in Sierra 10.12.6 running ProTools 12.3) I would get an all black code screen talking about kernels before it would fully reboot and then go black again. Now, after upgrading ProTools and macOS, I don't get the code screen but I still get the perpetual reboot sequence... |
#50
|
|||
|
|||
Re: Mbox Pro 3 not working with MacOS Sierra
Quote:
Sent from my SH-04H using Tapatalk
__________________
Music is the Message |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Has anyone tried Eucon with MacOS Sierra beta? | Yore | Artist Series | 2 | 11-08-2016 11:39 AM |
PT on macOS Sierra? | eesn | Pro Tools 12 | 66 | 10-01-2016 11:46 PM |
Profire 2626 not working with macOS Sierra | jwilkers | Pro Tools 12 | 15 | 09-24-2016 09:27 AM |
macOS Sierra 10.12 not yet supported | Avid | Technical Alerts | 0 | 09-20-2016 10:34 AM |