|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
microphone problem
i am trying to recording vocals with my condenser microphone plugged into my mbox 2 mini with a xlr cable. in pro tools i have an audio track up with the input set to mono input 1 (which is correct) and the output is 1-2 stereo. i have my input monitoring only on and the track is set to record and the phantom power is also on. the mix knob is all the way to the left, but the problem is even when i go up and down with my input 1 volume knob on my mbox the volume level on pro tools does not move. as soon as i hit record enabled on my track the volume automatically goes to a little over zero and does not move. i can here my self talking into the mic but after i record and listen i can hear nothing. i also tried another cable and still the same problem. what is going on?
|
#2
|
|||
|
|||
Re: microphone problem
Not knowing how much experience you have, I'd have to guess you're not pressing all the record buttons properly. 1st you record enable or arm the track you wish to record on, then you hold down record and start, or ctrl/space bar. Are you metering pre or post?
|
#3
|
|||
|
|||
Re: microphone problem
i tried using those buttons but still the same thing happened the volume level still just stayed at that one level and heard nothing on playback. im not sure what im metering
|
#4
|
|||
|
|||
Re: microphone problem
Do you have the pad enabled?
|
#5
|
|||
|
|||
Re: microphone problem
no the pad is turned off and the phantom on
|
#6
|
|||
|
|||
Re: microphone problem
when i hit the record enabled button on the audio track the mic just shoots up to a certain volume and just does not move at all when i move the volume controls on my mbox. then when i click out of record the mic goes back to zero. does anyone know why this is happening?
|
#7
|
|||
|
|||
Re: microphone problem
Sounds like to waay too hot or a direct short. have you tried it in a guit amp or something?
|
#8
|
|||
|
|||
Re: microphone problem
i have the same problem....however, my mic have worked before and i recorded ok. this mic problem has happened before but it was rectified when i rebooted my system....now nothing works....i have a mac by the way. when i record enable the track, then start recording, the mic level jumps to a level and stays there static. im out of ideas on how to fix it...PLEASE HELP.
|
#9
|
|||
|
|||
Re: microphone problem
I get this sometimes when i go to record guitar. It just stays up at a certain level then on record-arm off, it goes back down. It is fixed with a reboot for me....
__________________
Core i7 920 OC'ed @ 4.0 GHz (200 X 20) 12 GB Patriot Viper Extreme Asus P6T OCZ Agility 64 GB SSD Hitachi 1TB 32 MB HDD WD Caviar Black 500GB Saphhire HD 5850 3 x 20" monitors Eleven Rack w/ ERXP Fender Super Champ XD Marshall JCM2000 DSL100 Silver Edition W/ Silver Jubilee Cabinet |
#10
|
|||
|
|||
Re: microphone problem
i rebooted like 4 times..no exaggeration..still the same...
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Microphone Help! | Mvrphy | General Discussion | 7 | 02-26-2012 12:20 AM |
Microphone Help | NinjaJedi | Pro Tools M-Powered (Win) | 4 | 09-14-2010 06:26 PM |
Problem with microphone/pres on Mbox 2 Pro | benjgc | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 2 | 02-03-2009 09:47 PM |
Problem with the microphone input Digi 003 Rack | Flux06 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 3 | 06-30-2008 01:11 PM |
mic pre VS microphone Help | happasito | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 0 | 03-01-2005 02:23 AM |