|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
using outboard gear
This is the first time I've tried to hook up outboard gear to the digi001 and I can't get. Basically could some one tell me the signal path. I'm using a multi-fx unit and I would like to us it on one of my audio tracks but I don't understand if I need to use an Aux track or not.
Help Please!! |
#2
|
|||
|
|||
Re: using outboard gear
Hi,
If you are routing the whole signal through an external unit, select the appropriate output on the channel strip (rename your ins and outs with meaningful names in the "I/O Setup" for an easier life). Then add a new AUX track and set the input of the AUX track to come from the external unit. Then you'll hear the resulting signal. If you don't want the whole signal to go through the external device, leave the output of the track alone, and select the external device/Digi001 OUT in one of the Sends (underneath the plugins). You'll still need the AUX track to monitor the returned signal though.
__________________
Miles Young |
#3
|
|||
|
|||
Re: using outboard gear
Quote:
Thanks in advance, Brian |
#4
|
|||
|
|||
Re: using outboard gear
Quote:
__________________
i love my apple iPhone! |
#5
|
||||
|
||||
Re: using outboard gear
Quote:
No you do not "need" to use an aux track you can use it on any track as a HW insert, accessed from the inserts section of the track in the I/O selection of the inserts drop down But might want to put it on its own Aux track as a parallel effect for multiple tracks, which is how I do it Physically you simply connect it to one (or two if a 2 channel unit) of the 8 channels on your 001 So if it is a 2 channel unit , say 5-6 of your 001---- go from the 001,, 5-6 outs to the ins on your HW unit, and then from the outs on your unit,, to the 5-6 ins on your 001 So here is my set up with my HW compressor on 5-6 and renamed 3U and my HW reverb renamed M7 both are on there own Aux tracks,,, the reverb so I can send multiple tracks to it and the Comp as a 2 bus compressor on my 2 Mix track which the entire mix routes to before going to the main 1&2 outs (which I have renamed Stereo Mon) So here you see they are in the inserts sections of their Aux tracks the M7 3rd from right and the 3U second from right Here is where they are accessed from the inserts -I/O section dropdown , this is the inserts for the M7 track and at bottom you see i/o selection in blue,,, and M7 is checked
__________________
System : Studio - Avid Carbon interface , PT Ultimate 2023.12 Mid 2020 (intel) iMac 27" Ventura 13.2 .1 Mobile - 2021 14 " MBP M1 Pro PT Ultimate 2023.12.1 Sonoma 14.4 Enjoy the Journey.... Kev... Last edited by K Roche; 10-29-2021 at 12:36 PM. |
#6
|
|||
|
|||
Re: using outboard gear
Oops K Roche, you are replying to an old post from 2002. Sadly this is what happens when folks reactivate/spam old threads with irrelevant questions (the spam post was removed by mods).
|
#7
|
||||
|
||||
Re: using outboard gear
Ha ha well I am old and for go to look at the date so there ya go
__________________
System : Studio - Avid Carbon interface , PT Ultimate 2023.12 Mid 2020 (intel) iMac 27" Ventura 13.2 .1 Mobile - 2021 14 " MBP M1 Pro PT Ultimate 2023.12.1 Sonoma 14.4 Enjoy the Journey.... Kev... |
#8
|
||||
|
||||
Re: using outboard gear
On the plus side, I think you now have the record for the oldest thread to resurface
__________________
HP Z4 workstation, Mbox Studio https://www.facebook.com/search/top/...0sound%20works The better I drink, the more I mix BTW, my name is Dave, but most people call me.........................Dave |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ADC with outboard gear? | basslik | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 3 | 11-09-2010 06:33 PM |
Anybody using outboard gear with PT ? | Blackers | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 12 | 09-08-2010 04:23 PM |
where to put outboard gear | wayner | ICON & C|24 | 0 | 09-15-2005 06:19 PM |
Using outboard gear with 002 | Laboratory | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 1 | 10-29-2003 06:05 PM |
Outboard gear??????????? | adspi | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 6 | 05-20-2000 02:38 PM |