![]() |
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
![]()
So today I did two acoustic guitar tracks. Both were sent directly to the main mix out.
When I played back the first track (against a reference track), it was fine. Then I noticed I still had the DSP button engaged, so I turned it off. Now the first track was out of sync. In the edit window you could see the part came in exactly where it should have, on Bar Two, but I was HEARING the audio a good half second early. What? This has happened before as mentioned in my previous threads on this. We sent a session to engineering at AVID and they came back with a reply about me routing things wrong, which turned out NOT to be true, as later that session worked fine after rebooting Carbon and the Mac. After doing that today, the first acoustic guitar track played back fine. Now I went to record a second guitar track, played back, and all was fine...UNTIL...I disengaged the DSP button. Once again, now the SECOND track is playing early. Again, both guitars are assigned out the main mix outs, no plug ins on the master or the individual tracks. I have lost more time dealing with this over the months that I don't know whether have a funky Carbon unit or what. Where do I go from here? Am I misunderstanding something? Once in DSP mode, does the button have to stay engaged even on playback? If I turn it back on, playback is fine. But the first track has DSP button OFF and after restarting plays fine, so it can't be that. Right now the only way to hear guitar 2 in sync is to keep the DSP button in on playback. Thx Tom
__________________
iMac 27 |
#2
|
|||
|
|||
![]()
Just a random thought - do you have something funky switched on like Low Latency Monitoring ? I think that’s an HDX only setting but could be upsetting things….
It should play back in time regardless of which DSP buttons are pressed. That much is certain. |
#3
|
|||
|
|||
![]()
No low latency monitoring menu item any more in Ultimate....it's a major bug, because when the problem happens, a restart usually cures it. This is costing me a ton of time.
__________________
iMac 27 |
#4
|
|||
|
|||
![]()
Definitely another ADC bug!
|
#5
|
||||
|
||||
![]() Quote:
Sorry to hear this is still causing issues. I will send you a private message to request a few things from you. Thanks.
__________________
Kyle Splittgerber Senior Principal Product Designer Avid Berkeley, CA |
#6
|
||||
|
||||
![]()
This seems similar to what I'm experiencing. Did you get resolution?
|
#7
|
|||
|
|||
![]()
No I finally sold the unit and moved on...was spending more and more time in Cubase anyway...
__________________
iMac 27 |
#8
|
|||
|
|||
![]() Quote:
Too many problems overall.....thinking of doing the same.. |
#9
|
||||
|
||||
![]()
2021.12 just out, I hear it fixes a lot of Carbon issues. Please update.
__________________
Janne What we do in life, echoes in eternity. |
#10
|
|||
|
|||
![]()
Only one Carbon issue mentioned in the release notes, but will try..
|
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Carbon Phase issues with hardware inserts | alhardy | Pro Tools | Carbon | 4 | 12-30-2021 12:39 PM |
Sync Problems with Carbon Downstream | tomhartman | Pro Tools | Carbon | 7 | 07-01-2021 02:15 PM |
Using Carbon with Avid Sync HD? | akhafaji | Pro Tools | Carbon | 1 | 01-18-2021 12:03 AM |
Radar II sync to Pro Tools ***Solved*** | GuyPicks | Pro Tools TDM Systems (Mac) | 5 | 06-13-2008 09:04 AM |