Pro Tools 10 Audio Interface Setup- Fast Track Ultra

[kwj3532]

Hi,

I have recently cross graded from Pro Tools M Powered to Pro Tools 10. Upon the upgrade, I noticed my Fast Track Ultra interface does not work automatically anymore. I have downloaded and installed the new drivers for the interface. However, I still cannot manage to get it working in Pro Tools.

I have tried playing with the hardware inputs and outputs but with no success. Can someone help me setup my interface? It should be really simple, I think I'm just missing where the button is.

Thanks for your help!
Kyle

[Darryl Ramm]

What interface is selected as the setup>Playback engine?

[kwj3532]

It was the Pro Tools Aggregate I/O. After seeing this message I changed it to the Fast Track Ultra. It looks like I need to do something else too because when I try to select the input of my microphone on a test track, it still does not list the interface inputs.

[Bruce Paine]

Did you install the latest drivers for the Fast Track Ultra? (v2.2.2 for Mac added Mountain Lion support, if that is your OS)
Click on the Driver Updates link at the top of the forum:
http://www.avid.com/drivers

[kwj3532]

Yes I did. I think I found out what the problem was. I had to go to Setup I/O and reconfigure the input and outputs by clicking the "Default" button. I also plugged my MIDI keyboard in and it seems to just be working through the interface.

[Darryl Ramm]

great, looks like you fixed it.