Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > Pro Tools TDM Systems (Mac)

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-23-2005, 04:43 PM
whtrabit whtrabit is offline
Member
 
Join Date: Dec 2003
Location: Texas USA
Posts: 424
Default Rupert Neve Is Back!

http://www.rupertneve.com/

And this sounds interesting:

PorticoTM 5042 Two-Channel "True Tape" Emulation and Line Driver

Two-channel “True Tape” Emulation. An actual tape drive circuit is used to drive a tiny magnetic circuit and fed to a replay loop and actual replay preamp. “Record” and “Replay” levels are counter-ganged to keep overall gain approximately constant that only varies, as a tape would, with saturation level. The frequency response is tailored to that of an actual tape recorder. The result is a remarkable simulation of true tape sound, providing the nostalgic rounding and compression that offsets the harshness of poor digital recorders. Use with care! The dynamic range of a tape recorder was a lot less than that of the high resolution Portico Line circuit in which it is nesting!
Each of the two 5042 channels is equipped with the following:
- Input Level control.
- Tape Saturation Level control.
- 10 segment Meter reading input or saturation level.
- “7.5/15 IPS” switch
- Independent Bypass per channel
__________________
jimmy

15" Macbook Pro R 2.6 i7 Quad/16GB RAM/OS X 10.10.5
27" iMac 2.8 i7 Quad/16GB RAM/OS X 10.10.5
Studio One 3/Reason 8/Live 9/Logic Pro 9/Main Stage 3
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Rupert Neve Designs Portico 5012 - FA (two available) jamiecer Buy & Sell 1 03-18-2014 08:14 PM
Has anyone tried the new Rupert Neve Portamento? colnago 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 2 10-08-2005 10:14 AM
OT: Has Anyone Tried the Rupert Neve Portico Pre? MissHiss Pro Tools TDM Systems (Mac) 26 09-26-2005 08:38 PM
Rupert Neve Stone Knife 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 14 05-08-2002 04:10 PM
Rupert Neve Interview Xendo Tips & Tricks 17 05-05-2002 09:40 AM


All times are GMT -7. The time now is 07:04 PM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com