Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support


Avid Home Page

Go Back   Avid Pro Audio Community > Pro Tools Post Production > Post - Surround - Video

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 11-15-2004, 06:09 PM
Chief Technician's Avatar
Chief Technician Chief Technician is offline
Moderator
 
Join Date: Dec 2001
Location: NYC
Posts: 6,981
Default Divide and Conquer - MachineControl Selection Bug

Problem: When using MachineControl, if transport=machine and you have machine follows edit insertion/scrub enabled and you cue your machine in reverse, you get a magical selection on the timeline!

Reproducible: Yes, 100%

Steps to reproduce:

1. Enable MachineControl
2. Set transport=machine
3. Enable machine follows edit insertion/scrub in Setups-->Preferences-->Machine Control
4. Cue your machine in reverse.

What should happen: Machine should cue in reverse, stop, and leave the timeline alone!

What does happen: Machine cues in reverse, and when stopped, creates a selection on the timeline from where the reverse command was issued to where the machine stopped!

One of our engineers ran into this bug today when he went to perform a layback and forgot to turn off machine follows edit insertion/scrub.

How many times must I complain about this before it is fixed?! It's already in the answerbase in three entries! Check out 27175 , 8110 , and 25329.

Please fix this! Anyone else running into this bug? Please pipe up if you are!

Thanks for reading.
__________________
Jonathan S. Abrams, CEA, CEV, CBNT
Apple Certified - Technical Coordinator (v10.5), Support Professional (v10.6 through v10.10)
Reply With Quote
 

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
'Divide by zero' error after installing Pro Tools cs3 on Windows DigiTechSupt Technical Alerts 0 07-01-2009 11:18 AM
Structure? How to divide a sample(patch into multiplel parts gwiz31 Virtual Instruments 2 03-01-2008 05:56 PM
Divide and Conquer - Stop at Shuttle Speed Zero Chief Technician Post - Surround - Video 8 11-08-2004 07:20 PM
intger error(divide by zero) message noso 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) 0 10-01-2004 03:55 PM
Can I divide 1 partition without ... east3rdst 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 0 12-21-2003 11:25 PM


All times are GMT -7. The time now is 02:59 AM.


Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com