![]() |
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
![]()
My system does not detect the 192 i/o interfaces (2). I have restarted and power cycled many times and checked all connections. I had this same problem when I first added my Accel card a few months ago. . . but after a number of restarts it finally found the interfaces. Not today.
Another strange things is DigiTest sees the cards as follows: 0 HD accel 1 HD Core 2 HD Process 3 HD Process But they are physically in the slots in the order HD Core HD Accel HD Process HD Process DigiTest passes all card. However when I look at the Slot info the the Core Card the secondary Peripheral Information -> Peripheral Family: says "Firmware Missing!" and the Primary peripheral says Firmware 0.0. I doubt anything from Digi is version 0.0. The first 192 i/o is plugged into the HD core and the second jumpered to the first HD card. The only thing I have changed today is my 21" CRT monitor was upgraded to a 20.5" Dell LCD. WTF?
__________________
...for system configuration info see my profile (Click on member name) |
#2
|
|||
|
|||
![]()
OK, I deleted a bunch of DAE and ProTools preferences. . . the Interfaces are now detected and also show up in DigiTest with v3.0 firmware. . .
Very strange that this happened randomly. Also I still wonder what is going on with the order the cards show up in DigiTest.
__________________
...for system configuration info see my profile (Click on member name) |
#3
|
|||
|
|||
![]()
I had this today, but mine says firmware missing and if I click on the next card and then back to HD Core it shows the 192 with the firmware v3.0 this is very strange??
Anybody out there with any ideas why this happens
__________________
Raoul Crane
www.blaze-studios.co.uk PT 10.3.10 HD Accel 6, Mac Pro 5.1 12 Core 3.46hz Dual Boot Lion 10.7.5 and Maverick 10.9.5 32GB Ram Magma PE6R4i Chassis |
#4
|
||||
|
||||
![]()
Nice find, you revived a thread almost two decades ago
![]() Anyway, whatever software version you are using, first you need to upgrade firmware of the Core card, then reboot and another check suggests you need to upgrade firmware of the boxes if that is necessary at all.
__________________
Janne What we do in life, echoes in eternity. |
#5
|
|||
|
|||
![]() Quote:
Here is a screen shot of the slot info https://ibb.co/1rqx8q9 If I change from 5 HD Core Card to 4 HD Accel and then back to 5 HD Core it shows that port 1 primary peripheral is the same as expansion peripheral??
__________________
Raoul Crane
www.blaze-studios.co.uk PT 10.3.10 HD Accel 6, Mac Pro 5.1 12 Core 3.46hz Dual Boot Lion 10.7.5 and Maverick 10.9.5 32GB Ram Magma PE6R4i Chassis |
#6
|
||||
|
||||
![]()
It says firmware is missing. You need to ask that from Avid.
__________________
Janne What we do in life, echoes in eternity. |
#7
|
|||
|
|||
![]()
I doubt I’d get any help from them as the unit is so old. Strange thing is it’s all been working fine today. I hate problems like that because you never know if it’s going to let you down again
__________________
Raoul Crane
www.blaze-studios.co.uk PT 10.3.10 HD Accel 6, Mac Pro 5.1 12 Core 3.46hz Dual Boot Lion 10.7.5 and Maverick 10.9.5 32GB Ram Magma PE6R4i Chassis |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
HDI/O detected as 192??? | Biggreen | Pro Tools TDM Systems (Mac) | 5 | 09-27-2011 01:24 AM |
no HW detected why? | Joseph Vences | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 1 | 07-07-2009 09:26 PM |
888/24 not detected | thornlab | Pro Tools TDM Systems (Mac) | 0 | 03-27-2008 10:10 PM |
MBox 2 no detected | phoenixkdd | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 1 | 12-28-2006 09:21 AM |
Mbox is lit but not detected! | nehpyh | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 12-30-2004 06:30 AM |