|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
|
Thread Tools | Search this Thread | Display Modes |
#11
|
||||
|
||||
Re: Please help with 'Cannot initialize device...' when hitting play
Restarting does not fix.
The ONLY thing that fixes this is to Create a new blank session at the desired sample rate in ProTools, close it and then fire up the desired session. That always works. The Tascam appears to not do any initialization itself. It needs what ever happens in Protools when you create a new session to initialize the device. Protools is NOT the problem, the problem is the Tascam. I can power the Tascam off, power off the PC and then boot up the PC. Then turn on the Tascam. At this point we would think the Tascam has been initialized. But negative. The Tascam says it is set to 41.4 KHz. I fire up a session in Protools at 44.1 KHz and Protools says that it cannot initialize the audio driver. I create a new session in PT and close it, then fire up the real session and it plays fine. The sample rate is a red herring. The problem is that the Tascam can't be initialized, even after powering down. Changing sample rate requires a re-initialization, but the unit doesn't do it by itself, even after powering down. So whatever PT does differently during a 'create new session' vs an 'open session' initializes the Tascam. The Tascam does not appear to initialize itself even if you shut it off and turn it back on?!? It is in the same 'unable to initialize' state.
__________________
DC-Choppah's Project Studio: ASUS PRIME Z390-A / Intel i7 rackmount PC Windows 10 home 64 bit Pro-Tools 11.3.1 AIR Instrument Expansion Pack v2 WAVES Platinum plugin bundle Tascam US-16x08 Interface 100% Analog real time monitoring 16x4 Yamaha 16 channel MG16XU Analog Monitor Mixer Yamaha MX-88 / Novation XiO keyboards Mackie 4-channel headphone amp Adam A8X monitors Blue / Shure, etc. microphones Estonia 6' 8" Parlor Grand Piano Yamaha Studio Drum kit https://www.dc-choppah.com/ |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Initialize MC Transport device | Raynaldo Martine | Artist Series | 6 | 06-24-2020 03:00 PM |
Exclusive Control of Audio Device or Cannot Initialize Device | Alexlimbert | Pro Tools 12 | 4 | 10-22-2017 04:41 AM |
Pro tools 11 cannot initialize audio device | serstickman | Windows | 19 | 09-29-2014 08:32 PM |
Cannot initialize this playback device | firewired | Pro Tools M-Powered (Mac) | 2 | 01-15-2014 09:33 AM |
hitting play does nothing | CCash | Pro Tools TDM Systems (Mac) | 6 | 07-19-2005 09:23 PM |