|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Connecting an ADAT interface to a 192I/O
Hi guys,
yesterday I tried for the first time to connect my Motu 8Pre to the 192I/O using and ADAT connection. I'm able to get the signal of a Mic in to the Motu but not in PT. The connection are fin I'm going in Hardaware tab and change the Clock source in ADAT but still nothing. I tested the two ADAT cable and use two spare ones, also I tried the Motu trough ADAT connection on my LE system and it works perfectly. The sample rate it's for both 44.1. There is anything that I need to do or flag in the option in order to use it? My system: PT HD 2 192I/O MAC Pro Quad core Thanks Matt |
#2
|
|||
|
|||
Re: Connecting an ADAT interface to a 192I/O
Did you properly route everything in the patchbay of ProTools? Which optical in did you use, the one on the digital card or the one that without the SRC capability?
|
#3
|
||||
|
||||
Re: Connecting an ADAT interface to a 192I/O
maybe you tried that, but if not...
in the PT hardware setup go to tab 'digital' and set the input format to adat 1-8, then in the 'main' tab you can choose any input to adat 1/2...3/4..5/6 or 7/8 don´t forget to set the clock-source of your motu interface to follow the 192
__________________
MP5,1 12core 3.46ghz 96GB Ultimate HDX https://www.youtube.com/channel/UCIA...Rnu0Jfh-YsgftQ |
#4
|
|||
|
|||
Re: Connecting an ADAT interface to a 192I/O
Hi guys,
thanks for the reply. I used the ADat on the Digital card and 192 I/O and Motu are sync. One think the 192 ADAT it's supporting 44.1 or have to set it 48? Thanks again |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
can't get 192i/o to work with kurz ksp-8 adat i/o | fourthtunz | Pro Tools TDM Systems (Mac) | 3 | 07-16-2006 04:12 PM |
1622 interface on 192I/O's Legacy Port not working | Halstein | Pro Tools TDM Systems (Mac) | 5 | 05-14-2006 04:27 AM |
Problem connecting ADAT | richsorr | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 13 | 05-23-2005 12:06 PM |
Trade ADAT Bridge or 888/24 fo 192i/o | HughM | Pro Tools TDM Systems (Mac) | 3 | 02-27-2002 06:46 PM |
Connecting 888 to ADAT? | vocomotion | Pro Tools TDM Systems (Mac) | 2 | 10-30-1999 07:16 AM |