Pro Tools 12 on Win10 and C24

[Camilo Toledo]

Experiencing problems with my C24. I am getting the "An error occur while trying to establish an Ethernet connection" the diginet32.dll problem. I have tried some of the fixes I found here for Win 7, and also on the Avid site with no luck. Has anyone gotten this issue fixed and how you did it?

Just upgraded to Pro Tools 12 HD on Windows 10/ HD Native PCIe card and a 16x16 I/O. Home made PC/Asus x99/i7 5820k / 32 gigs corsair/SSD system and SSD audio.

After rebuilding my PC, installing software etc. connecting a few pre amps which I used with a patch bay Pro tools runs with no issues and everything seemed normal, recorded a few tracks, ran old sessions. I can monitor with a Central station.

I have all the db25 cables for the C24 connected. However, I decided to leave the one Ethernet cable connection for the C24 for the last step, since I thought it was the easiest thing to do... and that turned out to be the problem!! Any suggestions?

[Camilo Toledo]

Got it to work.

[soulsound_post]

Hey Camilo, I have the same problem ! any tips please ?

[deuc224]

Bump!!!!! Need help with exact set up PTHD, w10 pro and c24.

[paulmellors]

Same issue. Just migrated to a PC and can't connect to C24

[paulmellors]

:
Windows 10 will uninstall the Avid driver for ICON/C24 because it is unsigned.
It looks like it is installed in the network adaptor, the protocol is ticked, but it is actually uninstalled.

To install you MUST disable secure boot and keep it disabled. This allows the driver to be installed and the C24 works perfectly.