|
Avid Pro Audio CommunityHow to Join & Post Community Terms of Use Help Us Help YouKnowledge Base Search Community Search Learn & Support |
#1
|
|||
|
|||
1394 Error
Ever since I got the 6.4cs9 update, I keep losing connection between my 002 rack and Pro Tools... after a few minutes of working in a session, the 1394 led will start blinking (on my 002 rack) and Pro Tools freezes up? Ussually goes along with a H/W Buffer error. What can I do to fix this problem?
Also, since I got the 6.4cs9 update, a message at startup tells me that I'm not current with my firmware? The computer that uses Pro Tools is not connected to the internet, so is there somewhere I can download the latest firmware and load it onto that computer from a CD? Could that be a reason causing the above problem with the loss of connection? Thank you-- *I've bought a new Belkin Firewire Card, but it did not correct the problem. |
#2
|
|||
|
|||
Re: 1394 Error
1. You don't need to be connected to the internet to update your firmware.. it's an upload from the computer via the 1394 network card.
2. Which FireWire card do you have installed and have the 002 hooked up to? If it's not on the approved list, then get an Adaptec 4300. 3. If the above don't help you may have a faulty 002 power harness. Rail
__________________
Platinum Samples www.platinumsamples.com Engineered Drums for BFD |
#3
|
|||
|
|||
Re: 1394 Error
This was Digidesign's tech support email back to me reguarding the problem. It's clear what they want me to do, but VERY unclear what the heck the problem is???
Hi, You should contact tech support via telephone to set up an RA. They can arrange to have you send it in or send you a repair kit that you you can install your self. Call them at 650 731-6100 they will be happy to assist you. Be sure to select to speak to someone about a repair. Best regards, Digidesign Technical Support |
#4
|
|||
|
|||
Re: 1394 Error
They jumped to Rail's #3 conclusion.
__________________
Cavell Studios |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1394? | picture. | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 2 | 01-06-2007 09:27 PM |
DIGI 002 1394 port not responding, DSI error 1092 | dolby | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 2 | 08-10-2005 10:03 AM |
1115 error or 1394 led dissapear | Kim Matzen | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 0 | 07-09-2005 05:11 AM |
on board 1394 or separate 1394 card | PlayLoud | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 2 | 04-10-2005 03:50 PM |
digi002, cubaseSX, radeon 9200 & 9800 ->1394 error | icounil | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 2 | 09-17-2004 02:28 PM |