|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
M-Audio Profire Lightbridge
Is there any secret to getting the MAudio Profire Lightbrige Analog outs to work in PT9?
I've checked and unchecked the 'mirror' Spdif to Analog outs to no avail. I've done the driver install EXACTLY in the order they specify. Uninstalled and tried again. NO luck. I can't get PT9 standard to pass audio to the analog outs or the headphones which I assume is the same as analog outs. Anybody regularly using this piece with PT9 that could help me? Thanks, Grant
__________________
Rig 1-Mix/Mast: PTHD 11.3.1; MacPro 6core (6,1) 3.5 GHz Xeon E5; 10.10.3 (SSD Drives for audio); Apogee DUET, FireStudio2626 as Hware Inserts to PT for outboard Rig 2-Cutting&Remotes: PTHD 11.3.1; MacBook Pro (8,1) 2.8 GHz Dual i7; 10.9.2 (128GB int '6G' SSD drive); Profire LightBridge (FW800), 32ch Presonus Digimax FS |
#2
|
|||
|
|||
Re: M-Audio Profire Lightbridge
Mine works fine. Check your Pro Tools I/O.
__________________
| Logic Pro 9 | Reason 6.5 | Pro Tools 10 | MOTU UltraLite mk3 | RME ADI-2 | Summit Audio 2BA-221 x 2 | MOTU 8pre x 2 | | Mac Pro (4,1) 2.26gHz Xeon x 2 16gB OS X 10.7.4 | Macbook Pro (8,2) 2.2gHz i7 Quad 16gB OS X 10.7.4 | |
#3
|
|||
|
|||
Re: M-Audio Profire Lightbridge
What do you mean by 'check my I/O'? For what, Getz? And thanks!
__________________
Rig 1-Mix/Mast: PTHD 11.3.1; MacPro 6core (6,1) 3.5 GHz Xeon E5; 10.10.3 (SSD Drives for audio); Apogee DUET, FireStudio2626 as Hware Inserts to PT for outboard Rig 2-Cutting&Remotes: PTHD 11.3.1; MacBook Pro (8,1) 2.8 GHz Dual i7; 10.9.2 (128GB int '6G' SSD drive); Profire LightBridge (FW800), 32ch Presonus Digimax FS |
#4
|
|||
|
|||
Re: M-Audio Profire Lightbridge
See page 83 of the manual.
__________________
| Logic Pro 9 | Reason 6.5 | Pro Tools 10 | MOTU UltraLite mk3 | RME ADI-2 | Summit Audio 2BA-221 x 2 | MOTU 8pre x 2 | | Mac Pro (4,1) 2.26gHz Xeon x 2 16gB OS X 10.7.4 | Macbook Pro (8,2) 2.2gHz i7 Quad 16gB OS X 10.7.4 | |
#5
|
|||
|
|||
Manual? What manual PT 9 or profire? ;-)
Online?
__________________
Rig 1-Mix/Mast: PTHD 11.3.1; MacPro 6core (6,1) 3.5 GHz Xeon E5; 10.10.3 (SSD Drives for audio); Apogee DUET, FireStudio2626 as Hware Inserts to PT for outboard Rig 2-Cutting&Remotes: PTHD 11.3.1; MacBook Pro (8,1) 2.8 GHz Dual i7; 10.9.2 (128GB int '6G' SSD drive); Profire LightBridge (FW800), 32ch Presonus Digimax FS |
#6
|
|||
|
|||
Re: M-Audio Profire Lightbridge
Just send me all your gear and I will set it up and return it to you. I promise.
__________________
| Logic Pro 9 | Reason 6.5 | Pro Tools 10 | MOTU UltraLite mk3 | RME ADI-2 | Summit Audio 2BA-221 x 2 | MOTU 8pre x 2 | | Mac Pro (4,1) 2.26gHz Xeon x 2 16gB OS X 10.7.4 | Macbook Pro (8,2) 2.2gHz i7 Quad 16gB OS X 10.7.4 | |
#7
|
|||
|
|||
Re: M-Audio Profire Lightbridge
LOL!!!. So you meant the ProFire's manual page 83, Getz>
__________________
Rig 1-Mix/Mast: PTHD 11.3.1; MacPro 6core (6,1) 3.5 GHz Xeon E5; 10.10.3 (SSD Drives for audio); Apogee DUET, FireStudio2626 as Hware Inserts to PT for outboard Rig 2-Cutting&Remotes: PTHD 11.3.1; MacBook Pro (8,1) 2.8 GHz Dual i7; 10.9.2 (128GB int '6G' SSD drive); Profire LightBridge (FW800), 32ch Presonus Digimax FS |
#8
|
|||
|
|||
Re: M-Audio Profire Lightbridge
Well unless you mean to imply that on page 83 of the PT9 manual (the Profire manual doesn't have that many pages) I'm gonna find a way to 'remap' channels.. then the answer is that I have to again, just like with my MOTU system, DEFEAT certain input/output paths in the hardware's app. My problem was that I had all 4 ADAT banks enabled and the SPDIF and Analog outputs are at holes # 33-36 which OF COURSE -- aren't available in PT9 Standard!!!!
Does anyone else find it ironic that in Avid's LESSER software, M-Powered 7 and 8 ALL 34 ins and 36 outs of a ProFire LightBridge were AVAILABLE!!!!!!!! In that way -- MPowered was a 'superior' piece of sofware than to even LE -- and now it reminds me of why Avid had to create their 'own' software for the M-Audio products which were BIG on LOTS of IO. If I open PT Mpowered 8.0.4 right now and plug in my Lightbridge I have '34 ins' and '36 outs' available to me. But NOT in the software that REPLACED Mpowered 7/8.. Isn't that somehow - just WRONG!!??
__________________
Rig 1-Mix/Mast: PTHD 11.3.1; MacPro 6core (6,1) 3.5 GHz Xeon E5; 10.10.3 (SSD Drives for audio); Apogee DUET, FireStudio2626 as Hware Inserts to PT for outboard Rig 2-Cutting&Remotes: PTHD 11.3.1; MacBook Pro (8,1) 2.8 GHz Dual i7; 10.9.2 (128GB int '6G' SSD drive); Profire LightBridge (FW800), 32ch Presonus Digimax FS |
#9
|
|||
|
|||
Re: M-Audio Profire Lightbridge
Quote:
__________________
Core i7 920 OC'ed @ 4.0 GHz (200 X 20) 12 GB Patriot Viper Extreme Asus P6T OCZ Agility 64 GB SSD Hitachi 1TB 32 MB HDD WD Caviar Black 500GB Saphhire HD 5850 3 x 20" monitors Eleven Rack w/ ERXP Fender Super Champ XD Marshall JCM2000 DSL100 Silver Edition W/ Silver Jubilee Cabinet |
#10
|
|||
|
|||
Re: M-Audio Profire Lightbridge
PT M-Powered 7 and 8 did not support any more than 18 I/O. And no offense, but other than Machine Control, Ethernet Controllers, and The DV toolkit option, there really was no difference with M-Powered/LE. I have both as well as 9. I don't about the Lightbridge, but with my 2626 I always just routed the spdif and optical b last because PT sees the first 18 regardless of what they are. In PT 9 it sees the first 32, anything after is ignored. (should be.) So if you route the outputs you don't need to the end in the control panel, the ones you do need should be all available.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
m-audio profire lightbridge protools 9 | patcram | Pro Tools 9 | 7 | 11-28-2010 05:17 AM |
M-Powered 8 + M-Audio Profire LightBridge | Zergei | Pro Tools M-Powered (Win) | 0 | 04-26-2010 11:07 PM |
PT LE & M Audio Profire Lightbridge | jakas | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 0 | 07-06-2009 07:12 AM |
PT 7.3 with M-Audio ProFire LightBridge | SteveD@DAWPRO | Pro Tools M-Powered (Win) | 14 | 01-23-2007 03:28 PM |
M-Audio ProFire Lightbridge | KamilFX | Pro Tools M-Powered (Win) | 13 | 11-20-2006 12:34 AM |