Pro Tools v2021.3 Now Available

[Kyle Splittgerber]

Hi Carbon Users,

In case you missed it, yesterday we released Pro Tools 2021.R3. Go here for info.

Below is the list of Carbon fixes. Please note that there are a few issues with macOS 11.2 (Big Sur) that we expect to be resolved in macOS 11.3 once it's released. For workaround information on those macOS 11.2 issues, see the "Pro Tools | Carbon" section here.

• Audio dropouts/artifacts in 10.15.7 and 11.2.3; Resolved in future Big Sur release (PT-268800)
• No Audio Output over AVB; Resolved in future Big Sur release (PT-268662)
• Unable to create Session at new Sample Rate; Resolved in future Big Sur release (PT-265729)
• No Audio device in Audio Midi Setup; Resolved in future Big Sur release (PT-268874)
• "Cannot Communicate with Playback Engine"; Resolved in future Big Sur release (PT-268881)
• Delay compensation when using both hardware inserts and AAX Native plug-ins on the same track is now calculated correctly. (PT-268293)
• Delay compensation for hardware inserts on DSP Mode-enabled tracks is now calculated correctly for bounced/committed audio. (PT-267502)
• Fixed an issue where a hardware insert assignment could be deleted after restoring I/O settings from session. (PT-266606)
• DSP Mode now works correctly for mix groups. (PT-268738)
• The "DSP Mode has been automatically enabled..." dialog is no longer redundantly shown after freezing a track. (PT-268275)
• Fixed a case where a dialog would incorrectly indicate that the clock source is not valid. (PT-267542)
• The "Pro Tools can't communicate..." dialog now appears immediately after Pro Tools | Carbon is disconnected from the Mac. (PT-267393)
• Fixed an issue where monitor output level would be louder when recording to DSP Mode-enabled tracks with count off enabled. (PT-270388)
• Fixed an issue where line outputs 1-4 would be muted after disabling Alt 1 and Alt 2 monitors. (PT-269069)
• Fixed an issue where Talkback Mic input could distort. (PTHW-218)

As you can see, there are a number of fixes for delay compensation with hardware inserts. I know some of you were running into problems here, so please let us know how things are working once you update.

Additionally, some of you are experiencing issues with noticeable fan noise on the unit. We are closely investigating this and will update you as soon as possible. Thank you very much for your patience on this.

[darkwavo]

Originally Posted by Kyle Splittgerber

Hi Carbon Users,

In case you missed it, yesterday we released Pro Tools 2021.R3. Go here for info.

Below is the list of Carbon fixes. Please note that there are a few issues with macOS 11.2 (Big Sur) that we expect to be resolved in macOS 11.3 once it's released. For workaround information on those macOS 11.2 issues, see the "Pro Tools | Carbon" section here.

• Audio dropouts/artifacts in 10.15.7 and 11.2.3; Resolved in future Big Sur release (PT-268800)
• No Audio Output over AVB; Resolved in future Big Sur release (PT-268662)
• Unable to create Session at new Sample Rate; Resolved in future Big Sur release (PT-265729)
• No Audio device in Audio Midi Setup; Resolved in future Big Sur release (PT-268874)
• "Cannot Communicate with Playback Engine"; Resolved in future Big Sur release (PT-268881)
• Delay compensation when using both hardware inserts and AAX Native plug-ins on the same track is now calculated correctly. (PT-268293)
• Delay compensation for hardware inserts on DSP Mode-enabled tracks is now calculated correctly for bounced/committed audio. (PT-267502)
• Fixed an issue where a hardware insert assignment could be deleted after restoring I/O settings from session. (PT-266606)
• DSP Mode now works correctly for mix groups. (PT-268738)
• The "DSP Mode has been automatically enabled..." dialog is no longer redundantly shown after freezing a track. (PT-268275)
• Fixed a case where a dialog would incorrectly indicate that the clock source is not valid. (PT-267542)
• The "Pro Tools can't communicate..." dialog now appears immediately after Pro Tools | Carbon is disconnected from the Mac. (PT-267393)
• Fixed an issue where monitor output level would be louder when recording to DSP Mode-enabled tracks with count off enabled. (PT-270388)
• Fixed an issue where line outputs 1-4 would be muted after disabling Alt 1 and Alt 2 monitors. (PT-269069)

As you can see, there are a number of fixes for delay compensation with hardware inserts. I know some of you were running into problems here, so please let us know how things are working once you update.

Additionally, some of you are experiencing issues with noticeable fan noise on the unit. We are closely investigating this and will update you as soon as possible. Thank you very much for your patience on this.

Great news. Thanks so much.
Does this mean Pro Tools can run on a new M1/Big Sur Mac without Rosetta?
Planning on buying Carbon ASAP.
Thanks again !

[Sardi]

Originally Posted by darkwavo

Great news. Thanks so much.
Does this mean Pro Tools can run on a new M1/Big Sur Mac without Rosetta?
Planning on buying Carbon ASAP.
Thanks again !

No.

It’s in the release notes.


Sent from my iPhone using Tapatalk

[Kyle Splittgerber]

Hi All,

I wanted to follow up and let you know that Big Sur 11.3 was released which resolves a few of the Carbon bugs I mentioned above. I encourage you to update if you are running into these bugs.

• Audio dropouts/artifacts in 10.15.7 and 11.2.3; Resolved in future Big Sur release (PT-268800)
• No Audio Output over AVB; Resolved in future Big Sur release (PT-268662)
• Unable to create Session at new Sample Rate; Resolved in future Big Sur release (PT-265729)
• No Audio device in Audio Midi Setup; Resolved in future Big Sur release (PT-268874)
• "Cannot Communicate with Playback Engine"; Resolved in future Big Sur release (PT-268881)

Thanks.

[K Roche]

Good news ...........

[dominicperry]

Originally Posted by K Roche

Good news ...........

Bad news for those of us who want to stay on 10.15.7..............

Dominic

[darkwavo]

Originally Posted by Kyle Splittgerber

Hi All,

I wanted to follow up and let you know that Big Sur 11.3 was released which resolves a few of the Carbon bugs I mentioned above. I encourage you to update if you are running into these bugs.

• Audio dropouts/artifacts in 10.15.7 and 11.2.3; Resolved in future Big Sur release (PT-268800)
• No Audio Output over AVB; Resolved in future Big Sur release (PT-268662)
• Unable to create Session at new Sample Rate; Resolved in future Big Sur release (PT-265729)
• No Audio device in Audio Midi Setup; Resolved in future Big Sur release (PT-268874)
• "Cannot Communicate with Playback Engine"; Resolved in future Big Sur release (PT-268881)

Thanks.

Sorry y’all ,
Guess I’m still confused.
Does this mean carbon now works with the new M1/ Big Sur Macs?
I’m thinking of pairing Carbon with a new IMac unless anyone advises against it.
Thanks again!

[dominicperry]

Originally Posted by darkwavo

Sorry y’all ,
Guess I’m still confused.
Does this mean carbon now works with the new M1/ Big Sur Macs?
I’m thinking of pairing Carbon with a new IMac unless anyone advises against it.
Thanks again!

As per this page .. https://avid.secure.force.com/pkb/ar...m-Requirements

Big Sur is qualified BUT M1 Macs are not.
You might find it works. Or you might find it does not.