Avid Pro Audio Community

Avid Pro Audio Community

How to Join & Post  •  Community Terms of Use  •  Help Us Help You

Knowledge Base Search  •  Community Search  •  Learn & Support

Avid Home Page

Go Back   Avid Pro Audio Community > Legacy Products > Digidesign Hardware & Software

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 03-07-2023, 02:38 PM
ppuskari2 ppuskari2 is offline
Join Date: Aug 2004
Location: Lancaster, OH
Posts: 53
Default Manual needed for Gen 1 Digidesign ADAT Digital Interface

As some of the community knows me over the years I collect and still use pretty much everything Digidesign I can locate and find and use the older the better. I have 3 giant Nubus Digidesign rigs running with 3 fully loaded 12-slot Nubus expansion chassis running ProTools 3-5.01 Nubus. I've recently finally acquired 3 ADAT machines. 2 Alesis LX-20 and 1 XT (16-bit)

I've had 2 ADAT interfaces for several years but never had the ADATS. It seems like the XT will sort of work with my systems but before I put it on the main Mac rig, I'm trying to set things up with a Session 8 PC machine. The Session 8 cards are installed and working perfectly with a Session 8 Studio analog interface. Sounds just as nice as when using it on the Mac as expected. This machine also has the now rarish SampleCell II PC (ISA) card installed and it fully works too!

I have the older Blue Logo text ADAT Digital Interface installed and the system works the XT does receive ADAT 8 tracks misnumbered 1-5, 2-6, 3,7 4,8 But will NOT show up INPUT-wise to Session 8 at all. Also, it doesn't seem like Synch Lock is ever made. BOTH of my ADAT interfaces react the identical ways so I'm thinking it may be the software yet side or some combination of clocks I'm missing.

The power light comes on and the passthrough connections do work. I Have tested the INS/OUTS digital/analog on the XT unit as master and slave to the LX-20s and that all works correctly as expected.

The LX-20 will not work with the Adat interface due to its 24-bit word clock. Hence why I needed either the Blackface or XT for this older project.

I can find the manual for the Adat Bridge/24 but nothing for the early model.

Would love to get this working. If you have any experience with this interface what is supposed to happen on powerup IE does the lock come on or online before the PC comes up and the adats run? Is the interface ID2 or ID1 on the ADAT synch list. IE is the interface master or slave? I've tried both and the ADAT definitely doesn't show as slave ID2 if it comes up second. But not sure if the interface even selects as master if no midi is present.

So very hard without manuals.....

Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Can I use 4 adat ins from each digital interface? TOMATHY Pro Tools TDM Systems (Mac) 1 03-23-2011 11:35 AM
Advice Needed! - Pre amp/interface/ADAT use jimbojimbo 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) 9 03-31-2008 03:21 PM
ADAT Digital Interface René Vorkink Digidesign Hardware & Software 0 05-12-2006 03:07 AM
Manual needed for ADAT Interface milesofwire Digidesign Hardware & Software 2 04-20-2002 01:10 PM
Digidesign Old ADAT Digital Interface?? andrej770 Pro Tools TDM Systems (Mac) 2 12-16-2001 03:27 PM

All times are GMT -7. The time now is 04:01 PM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com