|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
||||
|
||||
Sync 2 ProTools
Hi all !
Here is my problem: I am using two MAC (iMac + MBP), one dedicated to sound and the other to video. Usually I use “Video Slave” for video on the second unit, and it works like a charm: no lag, smooth, frame scrolling and no headache with the format! Connected with Ethernet. Now I just bought Ultimate and still have Vanilla. So, I tested the same config: a Protools (Ultimate) for sound on one unit, and Protools (Vanilla) for video on the second. Ok, it works, but I'm late, I don't start immediately like with Video Slave, and no scrolling of the video in scrub mode. Is there a way to make it work like my first setup (with Video Slave)? Or is it just impossible that way? Not the format, I know there are some restrictions with Catalina I can re-encode them, not a problem. (both Mac 10.15.7, ethernet cat6 cable, PT 2020.11)
__________________
WIP house Prod - home studio iMAC - Pro Tools Ultimate 2022.6 - RME Digiface USB - Audient iD22 - Behringer ADA8200 - Digidesign C|8 - NI KK A61 STUDIO PRO Post-prod MAC Pro "Trash can" - Pro Tools HDX + Ultimate 2021.12/Avid C|24/S3/ProTools|Dock. Blackmagic. |
#2
|
||||
|
||||
Re: Sync 2 ProTools
Assuming you're talking about the software Video Slave, you should be able to set up your vanilla as a video satellite slave and your ultimate as a master. You could also sync the two through MTC but that's more complicated than satellite. Just put them on the same network and go to your peripherals.
__________________
-Ryan Young •2019 Mac Pro 3.5 GHz 8-Core Intel Xeon W - 48 GB 2666 MHz DDR4 (OS 10.15.5) •HD Native PCIe, HD Omni, 192 I/o, Pro Tools Ultimate •Avid S3 + Dock •Blackmagic Intensity Pro (HDMI) •5.1 Room with JBL LSR4300 series
|
#3
|
||||
|
||||
Re: Sync 2 ProTools
Yes I’m talking about Video Slave from Non Lethal Application. Great program by the way using it for one year now.
https://www.dropbox.com/s/zwv5ebtu7i...35.21.mov?dl=0 Now just have a look at the video: on screen you have both Video Slave and Pro Tools, VS down left and PT up right. Even if there are perfectualy sync, starting playing doesn’t work the same way, protools always late, and no scrubing at all Am I clear ? (French guy trying to explain technical in english ) WIP house Prod
__________________
WIP house Prod - home studio iMAC - Pro Tools Ultimate 2022.6 - RME Digiface USB - Audient iD22 - Behringer ADA8200 - Digidesign C|8 - NI KK A61 STUDIO PRO Post-prod MAC Pro "Trash can" - Pro Tools HDX + Ultimate 2021.12/Avid C|24/S3/ProTools|Dock. Blackmagic. |
#4
|
||||
|
||||
Re: Sync 2 ProTools
It is not clear, are you using MTC to connect 2 Pro Tools systems? As Ryan points out, there is a better way, Satellite Link. HD system as Master, Vanilla as slave. Put them on the same ethernet switch, and set it up it peripherals. Response is tight, you can loop, solo, etc.
__________________
Tom Hambleton CAS Ministry of Fancy Noises IMDb Undertone on Facebook Undertone Custom Sound Libraries "Groupable markers would be epochal!" -Starcrash |
#5
|
||||
|
||||
Re: Sync 2 ProTools
Ok, ok ! Made a mistake So, Satellite only ! Because I put MTC too ! I’ll give a try.
Used to Video Slave that does not need either Satelitte or MTC Thanks WIP house Prod
__________________
WIP house Prod - home studio iMAC - Pro Tools Ultimate 2022.6 - RME Digiface USB - Audient iD22 - Behringer ADA8200 - Digidesign C|8 - NI KK A61 STUDIO PRO Post-prod MAC Pro "Trash can" - Pro Tools HDX + Ultimate 2021.12/Avid C|24/S3/ProTools|Dock. Blackmagic. |
#6
|
||||
|
||||
Re: Sync 2 ProTools
So with Satellite activated, no change. It works of course, it's synchronized, but it doesn't start immediately, nor stop immediately, and no scrub. I would like to use my second Mac (with Vanilla protools) for video only, but it's not as efficient and functional as it is with Video Slave. Ok for audio (can use it for VIs, to take the load off the main unit), but not very useful for playing video.
I googled a lot to read about that subject, but found nothing to improve the workflow. Maybe I missed something Will stay on Video Slave for video.
__________________
WIP house Prod - home studio iMAC - Pro Tools Ultimate 2022.6 - RME Digiface USB - Audient iD22 - Behringer ADA8200 - Digidesign C|8 - NI KK A61 STUDIO PRO Post-prod MAC Pro "Trash can" - Pro Tools HDX + Ultimate 2021.12/Avid C|24/S3/ProTools|Dock. Blackmagic. |
#7
|
|||
|
|||
Re: Sync 2 ProTools
Did you disable the video engine in your "audio" Pro tools?
I too use Video Slave but on the same computer.. The video some time freeze for a second , do you have the same problem? |
#8
|
||||
|
||||
Re: Sync 2 ProTools
Quote:
Yes I disabled it. And no, no freeze, works very well, but maybe it’s because I’m using another computer for Video Slave. WIP house Prod
__________________
WIP house Prod - home studio iMAC - Pro Tools Ultimate 2022.6 - RME Digiface USB - Audient iD22 - Behringer ADA8200 - Digidesign C|8 - NI KK A61 STUDIO PRO Post-prod MAC Pro "Trash can" - Pro Tools HDX + Ultimate 2021.12/Avid C|24/S3/ProTools|Dock. Blackmagic. |
#9
|
|||
|
|||
Re: Sync 2 ProTools
Hi there, I'm also using Video Slave, synced via MTC. Were you able to find a solution to the scrubbing issue? I had the same question:
When you scrub or nudge in Pro Tools frame by frame, the video hosted in Video Slave doesn't follow. It syncs perfectly fine when it's being played down there. Is there a way to fix this in order to check frame accurate sync? Any help is much appreciated, thank you! |
#10
|
|||
|
|||
Re: Sync 2 ProTools
Actually it looks like if you sync via Avid Satellite Link, you can scrub. But you can't if you sync via MTC (dumb).
"Video Sync offers seamless playback of movies in sync to MIDI Timecode & MIDI Machine Control. It works with all major DAWs including Pro Tools®, Logic Pro X, Nuendo, Cubase, Ableton Live!, Bitwig and Studio One - or any other device that can generate MIDI Timecode as a source. Enjoy the tightest possible sync integration with Pro Tools|Ultimate™ & Pro Tools|HD™ using Satellite Link - for incredibly accurate scrubbing, selection, looping & moving in any direction in the timeline, or within Pro Tools® - while the picture constantly updates. Video Sync's sync engine provides stunningly fast lock-up times and guaranteed tight sync - in many cases, better than the video engine built into your DAW." Hope you're up and running smoothly! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ProTools not seeing Sync HD | Burmansound | Pro Tools HDX & HD Native Systems (Mac) | 8 | 01-24-2021 01:58 PM |
trying to sync protools, mo6,mpc | dwayne00 | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 3 | 03-14-2009 10:57 AM |
To sync transport of a Protools LE to a Protools HD... | Julien Apruzzese | Pro Tools TDM Systems (Mac) | 4 | 01-12-2008 04:22 PM |
Sync'ing Another DAW with Protools | NuBus | Pro Tools TDM Systems (Mac) | 1 | 04-17-2006 05:28 PM |
How do I Sync Protools with 24P | Kron | Post - Surround - Video | 14 | 09-24-2004 02:09 PM |