Mac Studio M1 Max

[gives]

Originally Posted by Cryos

Here's the link to the 12vDC Adapter I bought on Amazon that works with the HD Native Thunderbolt unit. Like I said it resolved the whole Low Power message on the Mac Studio.

Side note some bigger facilities I work with are experiencing the same issue in some of thier rooms and I've turned them on the same Adapter.

Here's the link:

YLYLXIMA 12V 1A Power Supply Adapter AC 100V-240V, DC 12V 12W AC DC Adapter Plug 5.5 x 2.5mm Charger 12Volt 1Amp DC Power Transformers for Monitoring LED Lights, etc. https://a.co/d/7hfk3BF

Nice Tip. I may grab one of those..G

[gives]

Well I grabbed one and here is what happened.
NO GO! I won’t try again to plug it in. For some reason this thing made it so I could not connect to DadMan Software and the network to the MTRX would not load. After I unplugged it is worked fine and loaded the MTRX unit to the network. Also heard a clicking sound when I was almost launched. I would avoid this thing if you have any issues or make sure it is in fact compatible. I am not going to need it as my ULTRA Mac Studio seems quite fine for months now with this rig, Plus will be upgrading to a new MTRX 2 in a couple of months which will change things also. G