|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
#1
|
|||
|
|||
Encoder problem
I've got one encoder that's not working on my D-command. I can
nudge a track over and adjust whatever I need but was curious, has anyone had this problem and are they easy to replace? PT 9 2X2.26 ghz Quad-Core Intel Xeon 14gb ram |
#2
|
||||
|
||||
Re: Encoder problem
Hi,
It is the actual encoder right ? not the display or one of the switches ? Couple of questions : - does the encoder ring still display a value ? - The display under the encoder is working fine ? - The switches for the encoder are working fine ? Can you run utility tests for : - touch : does the encoder respond to touch ? - Leds : do the encoder ring leds come up during the LED tests ? These encoders are not easy to replace. You will probably have to swap out the entire panel of the bank of 8 it is on. Get in contact with Tech Support and they should be able to advise procedures and possible costs depending the warranty status of your unit. Chris
__________________
Chris Lambrechts Applications Specialist- Live Sound |
#3
|
|||
|
|||
Re: Encoder problem
Wow, this problem has been happening for maybe 6 months and no sooner than I post it starts working fine. Evidently it's intermittent. All the tests you gave me seem to be working fine as of now. Hopefully it's some kind of software glitch. I'm updating to 9.02 here in a few minutes. Hopefully I won't see it again.
Thx Chris, it's nice having you on the DUC. -Caw |
#4
|
|||
|
|||
Re: Encoder problem
Hey Chris,
OK, it's reared it's ugly head again. Everything tests out ok except when I go to Utility-Test-Rotary. When I touch the encoder the red led signifying auto, under the encoder, does not illuminate like the other encoder-auto leds. When I turn the encoder to the left or right, the led comes on and stays on. It's suppose to turn off when I let go of it. And when I first go into Utility the read-out under the encoder lights up ever so slightly. You wouldn't even notice this if you weren't looking real close. I'll contact tech support but if you've had any of these experiences and have any ideas or cures please let me know. thx-Craig |
#5
|
|||
|
|||
Re: Encoder problem
Hi Chris,
I seem to be having the same or similar issue with two encoders on my fader module. When in test mode, the auto indicator doesn't illuminate when I just touch the encoders (although the value on the scribble does change). It does illuminate if I turn the encoder. After I turn the encoder, the auto indicator stays illuminated. The encoder ring seems to work (track) when I turn the knob in test mode, however, it doesn't track as I turn the encoder when I'm not in test mode? Please advise. Thanks. Mark |
#6
|
|||
|
|||
Re: Encoder problem
My issue appears to be intermittent as well. Is this a software or firmware issue?
|
#7
|
||||
|
||||
Re: Encoder problem
My icon has 1 encoder doing this.... was there ever a fix for this? I can bank but this is on my focus strip.
I suppose it is easily worked around but still annoying. Quote:
|
#8
|
||||
|
||||
Re: Encoder problem
I couldn't get the encoder to not work today.... Perfect all day. So I didn't cut off the top of the knob. When it acts up again I'll try cutting it off to expose the metal top.
|
#9
|
||||
|
||||
Re: Encoder problem
Just to update this issue.... it has gone away. Weird.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
D-Command Encoder problem | subwoof | Pro Tools TDM Systems (Mac) | 0 | 02-24-2010 11:51 AM |
The DTS Encoder for PT | houser | Pro Tools TDM Systems (Mac) | 0 | 09-04-2004 12:19 AM |
THE DTS Encoder for PT? | houser | Post - Surround - Video | 1 | 09-04-2004 12:16 AM |
Dithering question about SmartCode Encoder Encoder | poldo | Pro Tools TDM Systems (Mac) | 4 | 05-30-2003 06:41 AM |
Best MP3 Encoder? | Zep Dude | Tips & Tricks | 5 | 10-09-2000 08:15 AM |