PT 12.4 LLM issue

[Pedro perez]

So,select LLM and you are **** outta luck when it comes to monitoring through your interface of choice and thus to any custom headphone cue.this really reminds me why I abandoned pro tools back in 2005,why in the heck do they "deny"LLM other than to main LR at all?

[Pedro perez]

Anyone with a work around? Imac,clarett 8 PT12.4

[mesaone]

What's the issue? LLM is designed to let your sound card handle the input monitoring.

If LLM is messing with your workflow, turn it off.

[Pedro perez]

Originally Posted by mesaone

What's the issue? LLM is designed to let your sound card handle the input monitoring.

If LLM is messing with your workflow, turn it off.

When I turn LLM on I see the signal but don hear it on my clarett 7-8 outs (headphone cue) but can hear it only after signal has been recorded.

Ps> I tried 64 sample buffer but got a bunch of clicks and pops.

[mesaone]

Seems to me that LLM is operating as intended, and you need to configure live input monitoring and cue routing from within the Focusrite Control app.

[Pedro perez]

I will try that this evening.if LLM doesn't mute audio anywere in the bussing system my apologies,it must be me,but I even tried all presets within focusrite app.

[Pingafuego]

Originally Posted by Pedro perez

I will try that this evening.if LLM doesn't mute audio anywere in the bussing system my apologies,it must be me,but I even tried all presets within focusrite app.

check this thread:

http://duc.avid.com/showthread.php?t...put+monitoring

It´s about avid interfaces, but maybe it can help you!

[Rich Breen]

Please start with the PT ref manual:

"... certain Core Audio and ASIO audio interfaces that have a built-in mixer can use the Low Latency Monitoring option. Only tracks with inputs set to a physical output (not an internal mix bus) use Low Latency Monitoring. If your Core Audio or ASIO hardware does not have a built-in mixer, Low Latency Monitoring does not function. If you do enable Low Latency Monitoring with such hardware, monitoring will not available for record-enabled tracks in Pro Tools.

For all others systems, assign each track output to either Output 1 or Output 2 (mono), or both (stereo). Only tracks assigned to these outputs use Low Latency Monitoring."