|
Avid Pro Audio CommunityHow to Join & Post Community Terms of Use Help Us Help YouKnowledge Base Search Community Search Learn & Support |
#1
|
|||
|
|||
Overlapping Audio...
How do I paste a portion of audio onto an existing region, and have the overlapping parts of each play at the same time? The manual says that I must do this in slip mode, but when I do, the pasted audio does not merge or blend at the overlapping point, but it replaces the existing region.
Help anyone?
__________________
MBOX, Protools LE 6.1, Pentium 4 2.66 ghz, 40gig system drive, WD120 firewire external, 512 ram. |
#2
|
|||
|
|||
Re: Overlapping Audio...
Either place it on 2 separate tracks.. or use a crossfade.
Rail
__________________
Platinum Samples www.platinumsamples.com Engineered Drums for BFD |
#3
|
|||
|
|||
Re: Overlapping Audio...
Thanks for your response. Well first of all, crossfades don't apply to overlapping regions, but to regions of audio that are following each other. You would use a crossfade to keep the volumes steady as it switches from one region to the next.
I am in fact already using your advice on utilizing another track as a work around. But I stack a lot of vocal parts to create full harmonies (up to about 6 or 8 on some songs). This is causing me to have to run up my track count. I'm sure that there is a way to overlap on the same track. I've just gotta find it. Anyone else?
__________________
MBOX, Protools LE 6.1, Pentium 4 2.66 ghz, 40gig system drive, WD120 firewire external, 512 ram. |
#4
|
|||
|
|||
Re: Overlapping Audio...
A crossfade will play overlapping regions.. that's the very definition of a CROSS-fade. Place the regions so that the start and end of audio you want to share is butted up to each other.. select the area in the track.. and enter Control+F and change the Fade curve.
Say you have regions: xxxxxxxxxxxx yyyyyyyyyyyy put them on the same track: xxxxxxx|yyyyyyy Crossfade: xxx[zzz|zzz]yyy The area Z above will play audio from both regions X and Y. If you want more control than that - you'll have to use multiple tracks. Pro Tools is designed to emulate a tape system.. and no 2 pieces of audio can share the same time continuum on the same track (without a crossfade). If you need more tracks, then start sub-grouping or upgrade to a TDM system. For doing stacked vocals.. create a "Work session" with a work mix broken up into 5 tracks.. this will give you 27 tracks for vocals.. after recording your vocals.. do a stereo background mix.. and import that into your original session.. or start using the disable track functionality in Pro Tools 6.x Rail
__________________
Platinum Samples www.platinumsamples.com Engineered Drums for BFD |
#5
|
|||
|
|||
Re: Overlapping Audio...
Morris: take note: Rail is rarely wrong about how to use ProTools.
__________________
Quad 2.5 G5, 4.5G RAM |
#6
|
||||
|
||||
Re: Overlapping Audio...
Yes, I think I'd probably listen ti the guy with over 8000 posts, as opposed to the guy with 4. But hey...that's just me.
The solution you may be looking for Morris: use multiple tracks...then bounce the multiples down to a single. I often do this if I have 6-8 stacked choral voices.
__________________
Pro Tools 10.3.3 | HD Native | HD I/O 8x8x8 | Mac Pro 8 Core Westmere | 24GB RAM | OSX Lion 10.7.4 | API 3124 | Chandler TG-2 | UA 4-710d | Empirical Labs Distressor EL8X | Kemper Rack | |
#7
|
||||
|
||||
Re: Overlapping Audio...
Quote:
>>morris_the_cat If I may...your best way to do a large number of vocal edits would be to create a stereo submix of the backing tracks, import them into a new "vox works" session and use all the available voices to chop/replace/process/premix the final vocal performance. Import that back into the original session. Way more flexible than a bunch of xfades... good luck,
__________________
cheers, Andrew W7 pro 64_i7 3930K_16GB_ Nuendo 6.5.4-7.1.3 / PT 12.4 ------Mac Mini OSX Lion_PT 10.xx Allen&Heath GS R-24M_ full rack of vintage analog boxes _UAD2_Nugen_iZotope_Melda_Waves_Plugin Alliance_DMG and more 2.0 and 5.1 monitoring |
#8
|
|||
|
|||
Re: Overlapping Audio...
Yeah, that's another work around that I'm currently using as well. And I'd like to thank all of you for your input.
But, is there a way to do this on the same track without using all these work arounds? Does anyone know? Hit me back guys! Thanks again.
__________________
MBOX, Protools LE 6.1, Pentium 4 2.66 ghz, 40gig system drive, WD120 firewire external, 512 ram. |
#9
|
|||
|
|||
Re: Overlapping Audio...
Thanks Rail. Just viewed your reply. I think you might be the guy that can help me with this. By the way, ignore the post I just did (it was before i saw your reply). I guess I would need a step by step on hw to do that. because like I said, when I place one region overlapping the back end of another, it erases the preexisting region. So, are you saying that I could then do a crossfade and hear both pieces of audio within the overlapped portion? Let me know guy. Thanks again!
I know I can do the workarounds without a problem, but I'd like to save time if i can.
__________________
MBOX, Protools LE 6.1, Pentium 4 2.66 ghz, 40gig system drive, WD120 firewire external, 512 ram. |
#10
|
|||
|
|||
Re: Overlapping Audio...
Oh, and one more thing...I love this forum! I can see myself on here a lot. Until tommorrow.
__________________
MBOX, Protools LE 6.1, Pentium 4 2.66 ghz, 40gig system drive, WD120 firewire external, 512 ram. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Overlapping audio | gh4life | Pro Tools M-Powered (Win) | 4 | 01-13-2006 05:12 PM |
Overlapping audio | gh4life | Pro Tools M-Powered (Win) | 2 | 01-11-2006 11:07 PM |
Overlapping audio... | morris_the_cat | Tips & Tricks | 1 | 10-17-2004 12:40 AM |
Overlapping audio? | kaotikmuzik | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 3 | 02-15-2004 02:03 AM |