Pro Tools (Master) sync (MPC 2500 Slave) troubles...

[Connecticut]

Hi and thank you for taking the time to read my post, this is in regards to syncing.

First of all I am running Pro Tools 9 with the Apogee Duet, Akai MPC 2500, Edirol PCR MIDI keyboard.

I would like to sync the MPC 2500 as the slave to Pro Tools but I can not get the two to talk.

My Connections:
Edirol USB to COMPUTER
Edirol PCR MIDI OUT>MPC MIDI IN 1
Edirol PCR MIDI IN>MPC MIDI OUT A

Here are some pictures of the setup and what I have, any help would greatly be appreciated - I have gone to the AKAI site and followed the directions there but can't seem to get these to talk.

EDIROL
http://desmond.imageshack.us/Himg199...jpg&res=medium

MPC
http://img88.imageshack.us/img88/8518/photo2bzf.jpg

MPC SYNC SCREEN
http://desmond.imageshack.us/Himg835...jpg&res=medium

PRO TOOLS PERIPHERALS
http://desmond.imageshack.us/Himg838...jpg&res=medium

PRO TOOLS SESSION SETUP
http://desmond.imageshack.us/Himg69/...jpg&res=medium

...so that's my issue if you can help me out to get them synced up that would be great.

FYI I also had a MPC 1000 and had it synced fine before I got the 2500.