|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Hardware/sample rate errors on MacPro7,1
Since upgrading, I'm getting a "Pro Tools detected the number of HDX cards changed" errors when changing sample rates. I imagine this has nothing to do with the Mac but rather also upgrading to HDX2 (MTRX hung off the first card, Avid HD I/O off the second). DADman is set to follow sample rate from DigiLink 1, and the MTRX is the master clock. I'm on Pro Tools 2020.3.
I think this is the relevant error but I could be wrong (it's the last one before Pro Tools quit). Code:
8078.367636,dc003,0e10: CFicMariaTDMDeck::ErrorStop - err: -6080 8078.367752,dc003,000f: CDAEErrorHandler::DAEErrorStopProc - err - -6080 8078.372708,00307,0d02: Performing TCommand: CHandleErrorStopCommand 8078.372769,00307,000f: CDAEErrorHandler::HandleErrorStop - mErrorStopOSErr - -6080 8078.372916,00307,0e10: ReportDAEError - iDAEError - -6080
__________________
https://lukehoward.com/ |
#2
|
||||
|
||||
Re: Hardware/sample rate errors on MacPro7,1
I don't have HDX or MTRX, but I've had sample rate weirdness. When Pro Tools is closed and you open "AvidAudioServer", make sure the interfaces are clocked correctly. I had an issue where my 192 kept reverting to 192k although everything I did and needed was 48k. Once I changed it from the audio server, I didn't have any issues where my AES wouldn't feed my speakers or sync issues with other interfaces. Worth a look?
__________________
-Ryan Young •2019 Mac Pro 3.5 GHz 8-Core Intel Xeon W - 48 GB 2666 MHz DDR4 (OS 10.15.5) •HD Native PCIe, HD Omni, 192 I/o, Pro Tools Ultimate •Avid S3 + Dock •Blackmagic Intensity Pro (HDMI) •5.1 Room with JBL LSR4300 series
|
#3
|
|||
|
|||
Re: Hardware/sample rate errors on MacPro7,1
Quote:
__________________
https://lukehoward.com/ |
#4
|
|||
|
|||
Re: Hardware/sample rate errors on MacPro7,1
Quote:
NB: error is the number of peripherals connected to the HDX cards changed, not the number of cards. Interestingly I am seeing SDI O PIO Floating Point / PIO TDM Loop / TDM PIO Loop Int B-A fail on the primary (newer) HDX card. Hmmmmm.
__________________
https://lukehoward.com/ Last edited by LukeHoward; 05-09-2020 at 01:41 AM. |
#5
|
|||
|
|||
Re: Hardware/sample rate errors on MacPro7,1
This appears to be MTRX-specific, too. If I just connect a HD I/O to the first card there are no issues changing sample rate.
__________________
https://lukehoward.com/ |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Lynx aurora and pt 11 sample rate errors | soundroi | Third Party Interfaces | 1 | 03-01-2015 05:33 PM |
Sample rate setting on hardware gets forced to 44.1 by PT8 | Ludia | Pro Tools M-Powered (Win) | 6 | 12-26-2012 09:09 PM |
Sample Rate in Hardware Setup | protollo | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 3 | 11-06-2009 02:48 PM |
"mixed sample rate "errors in DT 2.0 | Michael Klinger | Post - Surround - Video | 4 | 11-20-2002 09:44 AM |
Hardware Sample Rate Conveters | meshtheflesh | Tips & Tricks | 10 | 02-14-2000 07:08 AM |