Is anyone using the MOTU 424 card with Pro Tools 2021.6?

[sean shannon]

I have a MOTU 424 card with interfaces, and I want to set up an extra PC with Windows 10 to run Pro Tools. Does anyone know if the card will work with the latest version and if I'll get 64i/o with ASIO?

[sean shannon]

OK, obviously not used much any more, but I have a couple 424 cards and a handful of interfaces that worked fine on PT12.5. I'm reasonably sure they'll work, but just seeing what your experience might be here.

[albee1952]

Check the MOTU website and see if they have a Windows 10 driver for your hardware. If they have a driver, odds are at will work. If they don't.............

[musicman691]

Originally Posted by albee1952

Check the MOTU website and see if they have a Windows 10 driver for your hardware. If they have a driver, odds are at will work. If they don't.............

And therein lies the rub - MOTU has never been all that great on Windows support; had all kinds of problems when I ran a Winbox and Cakewalk Sonar.

[seanmccoy]

My location rig used to consist of an old Sweetwater Creation Station PC with a PCI-424 and 2408 mk II, and it ran like a charm. Granted, I wasn't using Pro Tools then, and when the MB finally died I went the MacBook Pro and Pro Tools route as I had long since converted to PT as my main studio DAW (PC). But I still use a PCI-424 and 2408 mk II on my cheesegrater Mac for Logic, as well as a MOTU 8pre-es with the MacBook, and they both work great. I've always found MOTU drivers and support to be excellent, and their older hardware still works, at least on Mac.