|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
S6 with M1 mini
Hello,
Trying to upgrade PT with S6. Went from PT 2019.5 Catalina OS on a cheese grater working great with S6 and Xmon to M1 mini with PT 2022.5 working fine but can't connect with S6. Any advice would be greatly appreciated. |
#2
|
|||
|
|||
Re: S6 with M1 mini
Quote:
1. Make sure you installed WS Control and it’s running 2. If your using two hardwired networks, make sure you’re choosing the correct network for the S6 3. If your S6 was setup with a static IP, you will most likely need to assign this IP address in your Mac Network settings. Here’s a good resource https://resources.avid.com/SupportFi...rking_2021.pdf |
#3
|
|||
|
|||
Re: S6 with M1 mini
Thank you for your response. Yes the latest version of WS control is running.
The same ethernet cable (direct connection) that works with the old computer is moved to the mac mini and WS shows ! I think it was using DHCP with the old system. Does the S6 need an updated software or firmware? |
#4
|
|||
|
|||
Re: S6 with M1 mini
Quote:
More info here… https://avid.secure.force.com/pkb/ar...vid-S6-Support |
#5
|
|||
|
|||
Re: S6 with M1 mini
No the issue is that the S6 support plan stopped in 2020
|
#6
|
|||
|
|||
Re: S6 with M1 mini
The old working system had 2019 Versions of PT and S6. The new set up has latest PT 2022.5 and Eucon 2022.4 but S6 is still with the 2019 configuration
|
#7
|
|||
|
|||
Re: S6 with M1 mini
You shouldn’t have any issues running the newer Eucon or WS Control with any S6 software past 2018. You just won’t get the most advanced features new to the latest release of Pro Tools. I suspect the issue is with your network. If you’re running S6 software older than 2018 then you’ll most likely need to update.
I suggest you have a read and check your MTM network settings. https://avid.secure.force.com/pkb/ar...1-to-Static-IP |
#8
|
|||
|
|||
Re: S6 with M1 mini
Thank you for your help, i'll look into it deeper
|
#9
|
||||
|
||||
Re: S6 with M1 mini
Did you use migration assistant to transfer to this new machine? If so, try changing your computer name under System Preferences > Sharing.
Make sure you have exactly the same version of WSControl and Master Module software running. Here's the current EUCON compatibility info: https://avid.secure.force.com/pkb/ar...-Compatibility Jeff |
#10
|
|||
|
|||
Re: S6 with M1 mini
Thanks Jeff, i didn't use migration assistant. The new mac has a clean install of everything.WScontrol on the new machine is 2022.4.0.78
Could WScontrol 19.5.0.514 with works on the old machine be installed on the new machine ? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mbox Mini (3rd gen) not connecting in High Sierra on old Mac Mini or new iMac | Hoevelmann | FireWire & USB Audio Interfaces (Mac) | 0 | 04-26-2018 09:49 AM |
Mac Pro 12Core vs Mac Mini 4Core.. Mac Mini wins | Venshield | General Discussion | 12 | 12-06-2017 07:32 PM |
FS: Apple Mac mini 2012 quad i7 2.6 in Sonnet XMAC MINI SERVER rack | Jamie Mac | Buy & Sell | 1 | 07-02-2017 11:50 AM |
Am I Missing Something?! Mbox Mini, Mac Mini, Shockingly Bad | gunark | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 9 | 12-07-2010 12:58 PM |
Any Mbox2 Mini/MAC Mini Intel Users? Need help with Reason | Mbox2digi | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 3 | 07-31-2007 07:37 AM |