No Metering In Dadman with MTRX Studio

[LDS]

Originally Posted by creativecontrol

Everyone on the thread who is experiencing the meters issue - can you please respond back as to if you are having DADman auto-launch at boot or not? Thanks.


Jeff

Yeah, it is auto-launch at boot here.

[Jeff Schmidt]

This happened for the first time yesterday on my system..

DADman passes all audio as expected but no meter or signal indications anywhere.

Dante Controller shows all the connections and signal indications.

A quit and restart of DADman fixed it. Signal and level indicators are back.

I do not have DADman to launch on system start.

[kevin madigan]

I have tried both auto-launch (have script that waits to launch DADMAN after everything else is fully done) and manual start. The result is the same. No metering.
I have manually tried different sequences starting Pro Tools and EuControl and leaving DADMAN until last after waiting until everything else is fully loaded. I've also tried starting DADMAN first. No metering until re-start.

OS-X Catalina 10.15.7
MacBook Pro (16-inch, 2019)
Pro Tools Ultimate 2021.10.0
DADMAN 5.5.0 Build 2
EuCon 2021.10.1.29
MTRX Studio FW 1.0.3.2

[MCorbin]

Those of you having the issue, are you using a Self Assigned IP address (169.254.xx.xxx) or are you using DHCP or Static IP?

[KenSluiter]

My system does this behavior as well..
The Matrix uses a self-assigned IP.
I also auto-start it using the "Delay Start" app.
Hope that helps.

[kevin madigan]

I seem to have resolved my issue - by RTFM . Assigned fixed ip address for:
Computer NIC 10.0.7.25 | 255.255.255.0
MTRX Studio 10.0.7.21 | 255.255.255.0
Thanks for drawing my attention to the "169.254.xx.xxx" Mark

[paulo m]

Originally Posted by Nico Berthold

I have this problem all the time:
I start DADman witht he MTRX Studio, no metering.
If I quit DADman and repopen it right away the meters are all there.
it doesn`t happen with MTRX in Studio1, just the MTRX Studio.
I guess another one of these weird bugs ...

We have a MTRX and it happens occasionally. Quit and re-open does the trick. A two and a half year bug....

[LDS]

I feel like this is something that has come about since the last DADman/firmware update for my DX32. Today it dropped off the network entirely. A quick toggle of the DX-32 power button and it reappeared in DADman without much fuss.

[creativecontrol]

Thanks for the feedback. I will ensure that both Avid and NTP are aware of the issues.

best,


Jeff