Midi Help - Korg Triton Studio - XV 5050 - Digi001

[3inacipher]

I'm trying to figure out a way to "properly" daisy chain my Korg Triton Studio, Roland XV 5050, and Digi001.

Right now, I have the MIDI output of my Triton into the MIDI input of the XV 5050. The MIDI thru of the XV 5050 is connect to the MIDI in of the 001. Finally, the Digi 001 MIDI out is connected to the Triton's MIDI in.

I want to use the Triton's sequencer to control the XV 5050 and still be able to use the transport bar in PT to trigger my triton to play when it's set to external mode - basically so I can still drop my Triton sequences into PT. I do not sequence instruments in Protools; only vocals.

Thanks for the help in advance!

neek

[butter_lover]

This should work for what you are trying to do. Triton Midi out to Digi midi in. Digi midi out to XV5050 midi in. XV5050 midi thru to Triton Midi In. Midi Thru on Korg set to Off.
PT Default Thru set to XV5050 channel.
Good luck,
butta

[3inacipher]

Thanks! I'll put this formula to work in the morning...

neek