S6 Locked Strips not working

[ericlees]

Hello y'all

Recently updated the s6 m40 to 20.6, running pt ultimate 20.5 on a Mac.

While working on a session I can lock the desired strips, however after closing the session and re-open it, they are not locked (settings on the s6 are ok)
Anyone with the same problem? Is it a Bug or Am I missing something?

Thanks

[creativecontrol]

Greetings,

Can you verify that you have a Blue Star next to ProTools20Mac on the Workstations page?

best,


Jeff



Sent from my iPhone using Tapatalk Pro

[ericlees]

Hello Jeff
thanks for the reply. So there's no blue star next to the workstation, (pic attached). What do I need to do?

[creativecontrol]

Got it. So if you touch ProTools20Mac on that WS page on the touch screen it will show a blue Star and possibly a warning that now you will be associating and saving the console data to the Pro Tools session via this workstation. Now the data types on the Settings > Auto-Load section will be saved and restored when working with your PT session.



Jeff



Sent from my iPhone using Tapatalk Pro

[ericlees]

thank you, that solve the issue.

[creativecontrol]

Great to hear!



Jeff



Sent from my iPhone using Tapatalk Pro