Old Mac 9600 setup help needed asap *DELETED* *DELETED*

[sixlegcat]

Post deleted by sixlegcat

[Rail Jon Rogut]

Give us model numbers for the SCSI card and USB card.

There are 2 sets of 3 PCI slots... look on the motherboard for the silk screening... you want the core card in A0, the Farm in A1, the DSP farm in A2 -- depending on the cards will define where the SCSI card and USB card go.. the video card goes in B2.

If you have a 2920 it goes in B0, and the USB card goes in B1... If you have a 3940UW it goes in B1 and the USB card goes in B0... If you have an ATTO card it goes in B0 and hope the USB card is happy in B1.

I don't have my 9600 here.. so I can't give you a physical orientation.

Previous (old) thread

Rail

[DigiTechSupt]

Hi,

You still need to use the TDM ribbon cable across the top of the cards. I would use this slot order if you are putting the cards in the Mac. You may want to leave out the USB card we did not test these.

mix core card
mix farm
old style farm
scsi accelerator
usb card(logic xskey)
video


If you want the TDM hardware installation guide to refer to you can get it here:

http://akwww.digidesign.com/support/...tion_Guide.pdf

Thanks,

Digidesign Tech Support