Ethernet port 2

[Frank Kruse]

Will the control only work with ethernet port 1?

Thanks,

Frank.

[chris-euphonix]

Hi,

What do you mean by "ethernet port 2" ?

The artist series units I'm familiar with only have 1 ethernet port.

[Frank Kruse]

Originally Posted by chris-euphonix

Hi,

What do you mean by "ethernet port 2" ?

The artist series units I'm familiar with only have 1 ethernet port.

Sorry. The MacPro has 2 Ethernet ports. I was wondering if it´s better to put the Artist units on the second port to avoid putting them on the same network as the entire internet traffic?
When I set PT to use port 2 the unit isn´t found. Port two has the identical settings (DHCP, automatic).

Not sure if that´s even necessary.

Thanks,

Frank.

[chris-euphonix]

Ah.

It can be made to work with either port. Some specific configuration may be required. Fraid I don't know what happens if you simply leave defaults, and hope for the best.

[Frank Kruse]

Originally Posted by chris-euphonix

Ah.

It can be made to work with either port. Some specific configuration may be required. Fraid I don't know what happens if you simply leave defaults, and hope for the best.

hm. some configuration may be required.

I wonder how such info could be obtained. There´s nothing in the manual AFAIK.

But if it´s not necessary I´ll just leave it on port one with digidelivery, email etc. etc. and hope for the best.

Thanks,

Frank.

[chris-euphonix]

It should be fine - the volume of traffic is minimal.

[Artist PM]

In system prefs/EUCON change your network interface to port 2. Then restart your machine.

JC

[Frank Kruse]

Originally Posted by JC Haydon

In system prefs/EUCON change your network interface to port 2. Then restart your machine.

JC

Hi,
I tried what you suggested but port 2 isn´t available in the drop-down menu of the Eucon system prefs. I can type into that field but it will not accept a manual entry.

Frank.

[The golfer]

Frank,

I use an MC pro (not the artist series) with a macpro. The main reason I use the two ports is to cut internet access to the MC (There is a PC inside the MC Pro). The second reason is to have "eucon" (MC Pro) running on one ethernet cable and internet on the other.

From what I understand, the reason you can't select ethernet 2 in the "eucon" preferences is simply because your MC is plugged into the ethernet 1 of the mac pro and it is the only port it can see. If you want to use ethernet 2 you will have to unplug the ethernet cable from the Macpro and plug it into the second ethernet port.

If it work as the MC Pro (and it should), you can use any ethernet port for the MC but only one will be available in the "eucon' pref because only one ethernet port has the MC attached to it.

One thing to pay attention. You have to make sure that the ethernet port attached to the internet is the highest or the first, on the left side of the Macpro"network" preference. If not, you won't be able to have internet access.

I hope this make sense...

[Frank Kruse]

Originally Posted by The golfer

Frank,

I use an MC pro (not the artist series) with a macpro. The main reason I use the two ports is to cut internet access to the MC (There is a PC inside the MC Pro). The second reason is to have "eucon" (MC Pro) running on one ethernet cable and internet on the other.

From what I understand, the reason you can't select ethernet 2 in the "eucon" preferences is simply because your MC is plugged into the ethernet 1 of the mac pro and it is the only port it can see. If you want to use ethernet 2 you will have to unplug the ethernet cable from the Macpro and plug it into the second ethernet port.

If it work as the MC Pro (and it should), you can use any ethernet port for the MC but only one will be available in the "eucon' pref because only one ethernet port has the MC attached to it.

One thing to pay attention. You have to make sure that the ethernet port attached to the internet is the highest or the first, on the left side of the Macpro"network" preference. If not, you won't be able to have internet access.

I hope this make sense...

I tried plugging the artist control into port 2 (Internet is and was on port one BTW) but still no option to set it to port 2.

Maybe the "amateur" surfaces can not do port 2? There´s also nothing in the manual. In fact setting the system prefs of eucon is not even mentioned in the Eucon for PT manual.
Do I actually need to drag the PT icon into the systems prefs setting window. I haven´t and it seems to work. Just don´t know how it´s supposed to be done. And there´s little to learn from the manual.

Anyway, I´ll just stick with port one. As long as my IT admin doesn't complain about a weird device on his network I will be fine.