|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
Eucon2MIDI - app to convert Artist Control fader movements to MIDI CC data
Hi everybody,
I always wanted to use the four faders of my Arist/MC Control to control MIDI CC's on virtual instruments instead of mixing (I use my Artist Mix for that). Unfortunately that was not possible, and so I decided to write my own app for it. It's still in the middle of development and so it's not very flexible, but it already does the job great. EuCon2MIDI is a small program that runs in the background and monitors a selected network adapter and IP address for incoming data from the four faders. When this data is received, it is downscaled to values from 0-127 and corresponding MIDI controller data is sent out to a specified CC number. The four faders have to be assigned to <blank strip> in EuControl of course. The app uses WinPcap and needs a virtual MIDI port to connect to the DAW, for example loopMIDI. It is Windows only at the moment. I wanted to ask if there is anybody else who needs this functionality. If so, I am thinking about making it publicly available.
__________________
Intel Core i5-6500 @ 3.20GHz, 32 GB RAM, 3 SSD's, GeForce GTX 970 Windows 10 Pro, Version 1709, Build 16299.371 Steinberg UR824 Cubase Pro 9.5.21 Euphonix MC Control V1, MC Mix, MC Transport www.4soundtrack.com Last edited by iriswallner; 04-20-2018 at 10:09 AM. |
#2
|
|||
|
|||
Re: Eucon2MIDI - app to convert Artist Control fader movements to MIDI CC data
Hopefully you are sending 0-127 and not 0-128.
I know quite a few people who would like this (have wanted it.) Unfortunately most are on Macs. Also, any reason to stop at 4 faders instead of 8? There are more Mixes out there and the ability to use those faders (any of them) would be more appealing
__________________
Pro Tools Ult 2024.3.1, HDX 2, MTRX/SPQ, RME BBF Pro + MADIface Pro • S1 x 2, Fire Max11 x 2, Dock, iPad Air5 • Mac Mini 14,12, 12 core, macOS 13.6.6 • RAM 32GB, SSD 4TB, GPU 19 core • QNAP TVS-872XT 148TB TB3 |
#3
|
|||
|
|||
Re: Eucon2MIDI - app to convert Artist Control fader movements to MIDI CC data
If you could convert the control room knob to midi CC you could use it to control the volume fader of Source-VC. That would be really cool. Need it to run on a Mac though.
Espen
__________________
IMDB |
#4
|
||||
|
||||
Re: Eucon2MIDI - app to convert Artist Control fader movements to MIDI CC data
Quote:
__________________
Intel Core i5-6500 @ 3.20GHz, 32 GB RAM, 3 SSD's, GeForce GTX 970 Windows 10 Pro, Version 1709, Build 16299.371 Steinberg UR824 Cubase Pro 9.5.21 Euphonix MC Control V1, MC Mix, MC Transport www.4soundtrack.com |
#5
|
||||
|
||||
Re: Eucon2MIDI - app to convert Artist Control fader movements to MIDI CC data
I have to investigate this, but I think it should be no problem to do it. The question is, where to stop then - I guess everybody has different needs and suggestions...
__________________
Intel Core i5-6500 @ 3.20GHz, 32 GB RAM, 3 SSD's, GeForce GTX 970 Windows 10 Pro, Version 1709, Build 16299.371 Steinberg UR824 Cubase Pro 9.5.21 Euphonix MC Control V1, MC Mix, MC Transport www.4soundtrack.com |
#6
|
|||
|
|||
Re: Eucon2MIDI - app to convert Artist Control fader movements to MIDI CC data
I just want to say thank you...this is awesome, I have been wanting to control midi CC with the fader's on the artist mix, or Dock..but I'm on a Mac as well as PC so porting to the mac would be helpful.
But again, I really appreciate your effort...
__________________
Intel Intel Core i7-5930K 3.5 GHz Processor ASUS X99-PRO/USB 3.1 Motherboard,64 GB crucial DDR4 ram Thunderbolt EX 2 Windows 10 Pro ................................ 2013 MacBook Pro Retina i7 Quad-core, 16gb ram. Mac OSX 10.11.6 ........... Mac Pro (Late 2013) 2.7 GHz 12-Core Intel Xeon E5 Memory 128 GB 1866 MHZ DDR3 Graphics AMD FirePro D700 6144 MB PT Ultimate 2022.4.0 on Mac PT Ultimate 2020.12 on Windows Logic Pro X 10.6 Nuendo 12.0 ........... 1_Antelope Audio_Orion Synergy Core Studio |
#7
|
|||
|
|||
Re: Eucon2MIDI - app to convert Artist Control fader movements to MIDI CC data
Quote:
I would not bother with the control room knob -- that operates differently than the others.
__________________
Pro Tools Ult 2024.3.1, HDX 2, MTRX/SPQ, RME BBF Pro + MADIface Pro • S1 x 2, Fire Max11 x 2, Dock, iPad Air5 • Mac Mini 14,12, 12 core, macOS 13.6.6 • RAM 32GB, SSD 4TB, GPU 19 core • QNAP TVS-872XT 148TB TB3 |
#8
|
|||
|
|||
Re: Eucon2MIDI - app to convert Artist Control fader movements to MIDI CC data
I'm 2 years late to the party, but I would absolutely love to try this tool out. The inflexibility of the controllers regarding automation is huge.
|
#9
|
||||
|
||||
Re: Eucon2MIDI - app to convert Artist Control fader movements to MIDI CC data
+1 What ever happened on this? Did you finish developing it?
|
#10
|
|||
|
|||
Re: Eucon2MIDI - app to convert Artist Control fader movements to MIDI CC data
Just found this thread, is this little all still available, would lo e to try it!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Control app overrides fader of Artist mix | Gabikaze | Avid S1, S3, Dock and Control App | 0 | 08-23-2017 08:29 AM |
Eucon App/Artist Control Receiving External Data and messing my system- Help | AMIEL | Artist Series | 1 | 05-16-2016 09:54 AM |
Artist Control and screen following Fader Banks | poplikecrazy | Artist Series | 0 | 07-17-2011 05:21 PM |
Recording fader movements | dubaifox | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 2 | 12-16-2005 07:31 AM |
01v Fader Movements & PT | davec | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 3 | 04-10-2001 05:52 AM |