S6 incompatible with Rednet /Dante

[vudoo]

I'm testing the Focusrite Rednet Dante (Rednet 2, 5 and PCIe card) and came across a compatibility issue that i hope you guys can help me with.

The Rednet interfaces (Rednet 2 and 5) work fine but the PCIe card won't show up in my DAW unless i disconnect the S6. I have tried both the S6's ethernet port 1 to my switch where DHCP is provided by an Airport extreme connected on the same switch or S6's Ethernet port 2 directly to my MacPro Trashcan.

Any suggestions ?

[creativecontrol]

Greetings,

We have some users internally with Focusrite RedNet PCIe cards running with S6 without any issues. As a matter of fact, I happen to be receiving one of these cards this week so I will be exploring it as well.

Make sure under AudioMIDISetup you setup your card for 32 ins and outs.

What version of Pro Tools, S6 & OSX are you currently on?



Jeff

[vudoo]

Thanks for the reply

After further testing, i don't think the S6 is the problem. The DAW i've tested with (cubase, Logic, Live) just don't see the card 99% of the time. Dante and Rednet control sees it, strange. Also it does not appear in the Audio/midi setup. I'm using a Mac Pro cylinder, 10.11.6, S6 v2.2.

I'm testing the Rednet 2, 5 and PCIe...all the interfaces are recognized and working without any problems except for the PCIe.