|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Going out of the box with the 11R
I just received a new Weber Mass Lite off of eBay today to use with my Fryette Memphis. It was fairly late in the evening when I got home, so I was testing out the Mass at some pretty low volumes with the Memphis; it wasn't terribly great, but I don't have any illusions about attenuators at low volumes.
So then this fun idea comes into my head since my 11R is sitting on an adjacent cab. I take the Mass, unhook the speaker out going to the Memphis's stock speaker (even at zero dB there is still a little signal going to the speakers), and plug a 1/4" cable from the Line Out on the Mass into the Line In on the 11R. I dialed in a patch using the Line Input with just a cab sim turned on. I then plugged my Sennheiser HD280s into the headphone out and proceeded to jam. Is anyone else using their 11R as a bedtime cab simulator with a dummy load? The tones were surprisingly good, especially with the clean channel cranked (it had an awesome AC30/18watter vibe going on). I can do a short recording if anyone is interested in the results. The tone compared to the amp sims on the 11R was a little bit more "raw" and less "refined", if that makes any sense. |
|
|