Problem with Command|8 on PT8.1 HD1 Win7 64

[ynor]

Hi,

I've just setup a PC running HD1 on Win7 x64. It's built on the ASUS P755PD-LE and i7-870. The Command|8 doesn't connect with Pro Tools, but moving faders on the C8 and other knobs respons on PT but not the other way around. And of course the usual "cannot connect" window shows up telling to recycle the C8 or update periperals, which doesn't work. Here's how I installed the system

1) Clean Win7 x64 install updated through Windows update
2) Installed PT 8.0.0.3
3) Updated to PT 8.1
4) Updated to PT 8.1cs2
5) Turned on the Command|8, and the drivers were installed and Command|8 shows up under audio devices in device manager with a driver from 2007 from Focusrite.
6) Started PT without problems and runs fine, but when updating peripherals to Command|8 with midi send and return set to Command|8 it still shows not connected. PT resonds fader changes I do on C8, but not the other way around.

I've tried all the available USB slots and have a good working USB cable.

Can anyone help me?

[docric]

Right click on PTHD icon on desktop and select "run as administrator"...

HTH !

[ynor]

Thank you! That worked!! I can't belive I forgot to check the "always run as administrator".

Thanks again :)