|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Talkback
Hey how u all doin,
i need help once again, not much but little. i have got a new Command|8 controller, all i would like to know how do i get a talk back with the below given setup 003 Rack Protools 7.4 Command|8 i need the simple and the best way, if it can be routed thru command|8 then it would be great else no issues.... and i am not interested to buy any new hardware at all for this talk back thing but yes i do have a microphone Please reply asap i am stuck in the middle of a contact and i dont want to loose it just for this little thing... and thanks to all in advance who would be helping me out....
__________________
Blackmatchstick ----------------- Mac Pro 12 core | MacbookPro 15" |Protools 10 | Logic Pro 9 | Reason 5.0 | Abelton Live 9 | Traktor Dj | ----------------- |
#2
|
|||
|
|||
Re: Talkback
For talkback I just set up an extra audio track called "TB" and keep a mic plugged into one of the inputs on my 002 on the desk. Route that input to the TB track and when you want to say something to the talent just hit the record enable button.
__________________
Pro Tools 2019.6 on Windows 10 UA Apollo 8 |
#3
|
||||
|
||||
Re: Talkback
Quote:
I usually setup a "trigger" inside protools (which will eat up an additional voice) to turn the TB mic on and off as you stop and start protools, that way it isn't "on" when protools is playing or recording. And is always "on" when protools is stopped. To do the trigger thing... create a mono audio track. Select something like 10 minutes within the track (or something large enough where it extends past the last note of the song). Open up the Audiosuite Noise Generator. Create a 1KHz Sine at 0dB (or -2dB or -10dB, whatever you want). The sine wave will then fill the space of the selection on the new track. This sine wave track now becomes your "trigger" track. Assign it's output to bus 32 (or some other unused bus). Put a Digi Dyn/Compressor 3 on the Aux. Set it's Key input to bus 32 (or the bus you used) and click on the little button that looks like a key on the right side of the plugin. Pull the threshold all the way down as far as it will go. Set the ratio as high as it will go. Attack time of maybe 1ms or less, release time of 1second or so. leave any other settings at their default. When you hit play or record, the sine wave triggers the compressor and pulls the volume of the talkback mic down so far that you can't hear it at all. When you stop it will come back up and everyone can hear it. If you have a separate headphone mix for the musicians coming out A 3-4. You can assign the talkback mic aux to output A3-4 instead of A 1-2 and then you won't have to worry about the mic feeding back in the control room. If not then you'll have to manually turn down the control room level on the C|8. |
#4
|
||||
|
||||
Re: Talkback
I seem to remember a 3rd party talkback plugin that would mute the talkback mic/track whenever the transport was engaged. I just use a Presonus Central Station with a footswitch(built-in talkback mic)
__________________
HP Z4 workstation, Mbox Studio https://www.facebook.com/search/top/...0sound%20works The better I drink, the more I mix BTW, my name is Dave, but most people call me.........................Dave |
#5
|
|||
|
|||
Re: Talkback
from Massey
http://www.smassey.com/plugin.html
__________________
... "Fly High Freeee click psst tic tic tic click Bird Yeah!" - dave911 Thank you, Craig |
#6
|
|||
|
|||
Re: Talkback
Thanks for the reply....
don't u think doing the same thing wit an Aux channel would be more better cuz then we would be on a safer side of by mistake recording the talk back. but what i really wanted to know can we drive the talk back from the command |8
__________________
Blackmatchstick ----------------- Mac Pro 12 core | MacbookPro 15" |Protools 10 | Logic Pro 9 | Reason 5.0 | Abelton Live 9 | Traktor Dj | ----------------- |
#7
|
||||
|
||||
Re: Talkback
what do you mean by "drive"? There is no talkback button on the command 8, but if you jump to the TB track you can mute and unmute it on the command|8. It's not as integrated as the C|24's talkback..but you can still make it work.
|
#8
|
|||
|
|||
Re: Talkback
Quote:
thanks for te reply
__________________
Blackmatchstick ----------------- Mac Pro 12 core | MacbookPro 15" |Protools 10 | Logic Pro 9 | Reason 5.0 | Abelton Live 9 | Traktor Dj | ----------------- |
#9
|
||||
|
||||
Re: Talkback
The Behringer MON800 Stereo Monitor Mixer, is a simple solution that works well, I have a footswitch connected to operate it.
__________________
OSX 10.11.5, PT 12.5, iConnectAudio4+, Axe FX 2 XL+, Music Man Majesty |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Source Talkback AAX gets auto talkback | MIKEROPHONICS | Post - Surround - Video | 0 | 11-20-2013 08:15 AM |
C24 talkback | Scott Goldberg | ICON & C|24 | 0 | 12-01-2005 11:37 PM |
Best way to set up a talkback? | ukeist | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) | 2 | 04-22-2005 11:53 AM |
Talkback mic | rfreeman | 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Win) | 2 | 01-05-2001 12:44 AM |
Talkback | David Sutton | General Discussion | 7 | 11-22-1999 07:20 AM |