clock source and sample rate issues

[MartinoAl]

Hello,

I have recently purchased an Mbox 2 mini with Pro Tools 8.03 - which i have since upgraded to v8.05.

I am unable to record or playback audio due to...

"Problem detected with audio clock. check that your clock source and sample rate are correct."

The sample rate settings of the hardware and session are the same and the clock source is set to the default 'internal'.

I have followed the advice of other forums and trashed preferences, re-installed, upgraded...but nothing has yet solved this problem.

all advice or help gratefully received.

i am running windows 7, intel core i5, 2.67Ghz 4GB RAM

[albee1952]

You should post a Sandra report as described in the Help us Help You link up top of this(and every DUC) page. Reason being, the first thing we need to determine is whether your computer is compatible. Meanwhile, you could try moving the Mbox to another USB port. USUALLY the best port to use is the pair closest to the PS2 ports(mouse and keyboard), but sometimes, making a change can help.

[zedhed]

Make sure you have latest drivers for v8.05;

Try re-installing the drivers (with Mbox switched off) then reboot with Mbox switched on.

As Albee said though, it's best to post a Sandra Report so we can see your computer specs in detail.

[MartinoAl]

Hi guys,

Thanks loads for those suggestions. I did actually look for sites where I could update the drivers but couldn't find any updates compatible with version 8.05. If you know of anywhere, could you send me a link. I will try uninstalling and reinstalling the drivers too. My Sandra report is posted below this message. Please let me know if that reveals anything.

If you could make any replies very simple to follow I would really appreciate it as I am a complete novice to Pro Tools.

Thanks so much,
'Tino

SiSoftware Sandra

ID
Host Name : ComputerRight
Workgroup : WORKGROUP

Computer
Model : Acer TravelMate 8572T
Serial Number : LXTZT030751100B2152500
Chassis : Acer Notebook
Mainboard : Acer BAP50-CP
Serial Number : 108IB5MBQTF0002E
BIOS : Phoenix V1.20 12/13/2010
Intel vPro : 6.01.01.1045
Total Memory : 3.68GB DDR3 SO-DIMM

Processors
Processor : Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz (2C 4T 2.8GHz/2.93GHz, 1.73GHz IMC, 2x 256kB L2, 3MB L3)

Chipset
Memory Controller : Acer Core (Arrandale) Mobile DRAM Controller 133MHz, 2x 2GB DDR3 SO-DIMM 1GHz 128-bit, Integrated Graphics

Memory Module(s)
Memory Module : Nanya NT2GC64B8HC0NS-CG 2GB DDR3 SO-DIMM PC3-10700S DDR3-1334 (9-9-9-25 4-34-10-5)
Memory Module : Nanya NT2GC64B8HC0NS-CG 2GB DDR3 SO-DIMM PC3-10700S DDR3-1334 (9-9-9-25 4-34-10-5)

Video System

[zedhed]

Drivers;

http://secure.digidesign.com/service...&localeCode=en

[MartinoAl]

Hi Zedhead,

Thanks for that.
Those links all appear to be for v9. Would v9 drivers work with v8.5? I found links to update for v8 and have now installed/updated them.

I have noticed that when I go into the control panel and open 'Avid Mbox Mini', the window says 'Hardware not connected / Not Streaming' at the bottom of the ensuing window.

I have tried plugging the Mbox into all the USB ports on my laptop but am still getting the same problems.

Any further suggestions most welcome.

Thank you so much for help.
'Tino