Can I use this hardware combination?

[mozart]

OK Here is my configuration:

Mac pro Dual 3.0 Quad Core/ 10GB RAM 4x1GB HD
Atto SCSI
Kingston StorCase Infostation II Model S10A143 filled with 9x73GB SCSI
Magma 7slot chassis PE6R4
Pro Tools HD3 Accel 7.4.2
Apogee Big Ben
192 I/O
Apogee AD16X
Apogee DA16X

I'd like to get either "RME" HDSPe AES" or "Lynx" AES16e", and put it in my computer, so I can sometime use "Cubase" or "Logic" with my "Apogee" interfaces. (connecting their AES I/O to the "RME" or "Lunx") Pro tools hardware is limited only to 8 input when I use "Cubase 4" with it. I'd like to try tracking in these applications.
Is that possible? I will even turn down the chassis when I'm going to be using "Cubase 4" or "Logic".
Does Somebody have that configuration already? Is it working?

Logically, seems OK, but..
I'll appreciate any input, Thanks,

Kostadin

[mozart]

Nobody ever tried that?

[Johnny Hulst]

Except for the storecase, I use the same setup...
Works GREAT !!!

I'll have a dual 2.8 quad core, 10gb Ram, 3x 500gb HD, installed with an Atto UL5D PCIe card, Firewire SIIG 2 port PCIe card, and an PE6R4 filled with 1 process card & 2 accel cards.
External: 192 & 96, Rorke Data canisters with several SCSI 320 hd's & 1 ssl duende classic.

Works since the last update realy solid, no more hangs when editting a lot with audiosuite plugs... wich was a real drag... restarting the whole thing would do the job... but that in the past now

Only thing I have now is when I switch sessions between LE and HD the wave seems to be drawn incorrect, the audio is correct but how it looks, is totally wrong, does not even come close... have to do a redraw and then its fine.... hope they fix that soon.

Hope that will answer it.... but its not an total match with your setup, but I think its close enough and it will work just great.

many greetings from the netherlands

Johnny Hulst