|
Avid Pro Audio CommunityHow to Join & Post • Community Terms of Use • Help Us Help YouKnowledge Base Search • Community Search • Learn & Support |
#1
|
|||
|
|||
Avid, 003/002 as Control Surface only! Please!
Avid,
what would it take to update the drivers or firmware to make the 003 or 002 usable as a control surface only while using a separate interface? Is this feasible? Thanks |
#2
|
||||
|
||||
Re: Avid, 003/002 as Control Surface only! Please!
You should spend more time here as there is already a nice long thread about this. Most of us think a firmware update could allow this and many have let Avid know our wishes already
__________________
HP Z4 workstation, Mbox Studio https://www.facebook.com/search/top/...0sound%20works The better I drink, the more I mix BTW, my name is Dave, but most people call me.........................Dave |
#3
|
|||
|
|||
Re: Avid, 003/002 as Control Surface only! Please!
Avid,
any updates or comments on this issue? Thanks |
#4
|
|||
|
|||
Re: Avid, 003/002 as Control Surface only! Please!
Avid I'll pay you $500 for this.
__________________
HD Native Pcie, PTHD 11, PT12 Vanilla, Omni, Lynx Aurora 16, 192 I/O (16 in/8 out), 24 Fader D-Command, lots of preamps and compressors. MacPro 5.1 (12) Core (2009 MacPro 8 Core Upgraded to a 12 Core MacPro), 56 Gig Ram, SSD System & 3 - 2TB Drives, OSX 10.9.5, Windows 10 Via Bootcamp |
#5
|
|||
|
|||
Re: Avid, 003/002 as Control Surface only! Please!
The work around in the mean time would be to have both the 002/003 and your other interface hooked up. When tracking, launch PT's using the "other" interface and then switch to the 002/003 for editing and mixing.
OR if the other interface has an optical output, you could connect that to the optical in on the 002/003 and then you don't need to close and open your session. You get the best of both worlds. |
#6
|
|||
|
|||
Re: Avid, 003/002 as Control Surface only! Please!
Quote:
__________________
Core i7 920 OC'ed @ 4.0 GHz (200 X 20) 12 GB Patriot Viper Extreme Asus P6T OCZ Agility 64 GB SSD Hitachi 1TB 32 MB HDD WD Caviar Black 500GB Saphhire HD 5850 3 x 20" monitors Eleven Rack w/ ERXP Fender Super Champ XD Marshall JCM2000 DSL100 Silver Edition W/ Silver Jubilee Cabinet |
#7
|
|||
|
|||
Re: Avid, 003/002 as Control Surface only! Please!
Why would you be limited to 48kHz doing that? Is that a limitation of using optical?
|
#8
|
|||
|
|||
Re: Avid, 003/002 as Control Surface only! Please!
Yes, being that there is only one port.
|
#9
|
|||
|
|||
Re: Avid, 003/002 as Control Surface only! Please!
So if there were two ports going in, it would split the signal to accommodate a higher sample rate?
|
#10
|
|||
|
|||
Re: Avid, 003/002 as Control Surface only! Please!
Well actually I think it is not so much the one port but more about whether it supports SMUX which i don't think it does. If it did you could do 96k but only four channels. Do a search for SMUX on the forum and do some reading if you want to know more.
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
003 control surface (As audio) & control 24 as surface | crizdee | ProControl, Control|24, Command|8 | 7 | 01-04-2016 12:30 PM |
Avid S3 control surface | jacko | Artist Series | 1 | 03-07-2014 06:44 AM |
Control Surface For Protools 10 Mackie Pro Control or Avid Artist Control | lberrios1962 | Pro Tools 10 | 18 | 05-26-2012 12:51 AM |
D-Control Es32 Control Surface No Sound from Headphone outputs | mark007 | Pro Tools TDM Systems (Mac) | 0 | 02-08-2012 07:03 PM |
Mackie Control Universal or Tascam 1082 for control surface? | anders | Pro Tools TDM Systems (Mac) | 5 | 05-28-2007 06:12 AM |