PTLE 8 Windows 7 64bit robotic noise

[TOM@METRO]

We should sample this while it still exists for use as convolution robot.

[Theycallmeholla]

Ok i figured it out.

I turned off and unplugged my Digi 002 from the firewire port.

Then I installed PTLE 8.

I then ran the updater for 8.0.3 (Digi still unplugged)

Then I deleted the Audio Drivers for 8.0.3 (Its going to tell you to do that when you run the next step)

I then ran the audio driver updater 8.0.4b

After all that when I restarted and ran pro tools it asked me to turn it on. At that point I plugged it in and it runs perfect.


PTLE8 does officially run on Windows 7 64-bit


Holliday


http://www.myspace.com/theycallmeholla

[TOM@METRO]

Originally Posted by Theycallmeholla

Ok i figured it out.

I turned off and unplugged my Digi 002 from the firewire port.

Then I installed PTLE 8.

I then ran the updater for 8.0.3 (Digi still unplugged)

Then I deleted the Audio Drivers for 8.0.3 (Its going to tell you to do that when you run the next step)

I then ran the audio driver updater 8.0.4b

After all that when I restarted and ran pro tools it asked me to turn it on. At that point I plugged it in and it runs perfect.




PTLE8 does officially run on Windows 7 64-bit


Holliday


http://www.myspace.com/theycallmeholla

By perfect do you mean you can run large sessions (50+ tracks 150+ plug-ins and 8-12 VIs) with low buffer settings like we can in XP? I haven't been able to do that without distortion on W7 64.

[lowlevelowls]

Originally Posted by Theycallmeholla

Ok i figured it out.

I turned off and unplugged my Digi 002 from the firewire port.

Then I installed PTLE 8.

I then ran the updater for 8.0.3 (Digi still unplugged)

Then I deleted the Audio Drivers for 8.0.3 (Its going to tell you to do that when you run the next step)

I then ran the audio driver updater 8.0.4b

After all that when I restarted and ran pro tools it asked me to turn it on. At that point I plugged it in and it runs perfect.


PTLE8 does officially run on Windows 7 64-bit


Holliday


http://www.myspace.com/theycallmeholla

Hey, I was having a similar problem, but with my Mbox 2. I have the 8.0.4 driver installed. I have the robotic static noise on all my playback through PT. If I unplug my usb from the Mbox 2 and replug it in sometimes it starts working and sounds normal. Sometimes I have to do it about 5 - 10 times though. Do you know why this would happen and how come unplugging it and replugging it in several times would make it work all of the sudden? Very strange.

[Luigi82]

Robotic sound appears for me in PT 7.4 sometimes, and I solve just changing the H/W buffer size. But I don't know PT8, and don't know if it's the same problem.

[TOM@METRO]

There are times when this can help with all versions... Usually not.